![u[sonic]WS7 Weather sensor](https://terrasense.ae/wp-content/uploads/2023/11/usonicWS7-300x300.png)
Millivolt Sensor Node
The Millivolt Sensor Node enables a range of structural and geotechnical sensors to be integrated into a wireless remote condition monitoring system.
The Millivolt Sensor Node is used in a number of sectors to monitor a range of resistive bridge sensors, including strain gauges and load cells. It uses the integrated radio transceiver to report its measurements through Senceive’s wireless communications network to a gateway.
Examples of the sensors supported:
- Pressure sensors (differential, absolute)
- Foil strain gauges
- Torque sensors
- Load cells
- Load pins
- Moisture sensing
- Conductivity
Description
Features
- Waterproof, robust connectors for simple installation
- Regulated sensor stimulus
- 24-bit sensing performance
- 12-15 year battery life
- Versatile mounting options
- Waterproof to IP66 / IP67 / IP68
Additional information
| Brands | |
|---|---|
| Range |
±0.625V (±125mV/V) |
| Resolution |
74.5nV (14.9nV/V) |
| Repeatability |
±2.5μV (±0.5μV/V) |
| Stimulus |
5.0 ± 0.1V |
Reviews (0)
About brand
Since 2005, Senceive has been singularly focused on bringing intelligent wireless condition monitoring to civil engineering and rail applications. Senceive is widely seen as the global leader for wireless remote condition monitoring solutions, with more than 30,000 sensors installed in 2020 alone.
Related products
BOREHOLE ROD EXTENSOMETER
In stock
The Geosense® GEO-XB2 borehole rod type extensometer range is used to measure and locate settlement, displacement and deformation in soil and rock.
It consists of a reference head and one or more in-hole anchors each of which is placed at a known depth and connected to the reference head by either a rigid or flexible rod running inside a flexible sleeve, which keeps the rod de-bonded from the grout.
OPTICAL DISPLACEMENT SENSOR NODE
In stock
NANO TRIAXIAL TILT SENSOR
In stock
The Nano range uses the same core platform as our other tilt sensors, so it can deliver a similar level of performance and reliability, all in a small and robust enclosure. Nanos have been successfully used in many applications, including:
- Tunnel distortion
- Tunnel heave/settlement
- Embankment slippage (used in conjunction with stake mounts)
- Structural movement
- Rail track heave/settlement
- Rail trackbed cant and twist
IN-PLACE TILT METER MEMS
In stock
TILT BEAM MEMS
In stock
MEMS Tilt Beams are designed for attachment to structures, on either a vertical or horizontal surface, for the measurement of tilt or differential settlement.
They consist of a highly accurate MEMS sensor housed in a fully sealed enclosure which is mounted on a lightweight rigid GRP beam. This can be mounted onto the structure using special anchors. The GRP beam has a very low coefficient of thermal expansion meaning that thermal affects are minimised.
WATER LEVEL METER
In stock
PENDULUM SYSTEM
In stock
HPS-3500 (Hanging) and IPS-3000 (Inverted) Pendulums are used to measure the tilt or rotation by measuring the relative internal horizontal displacement of points along a true vertical line. Each has a tensioned, stainless steel wire and the effects of the earth gravitational forces to guarantee a perfectly vertical line between a fixed point and a tensioning mechanism. Typical applications include concrete dams, bridges and high rise buildings.
IMAGING & CAMERA
In stock
The FlatMesh 4G Camera is a best in class solar powered solution for static imagery in remote or industrial areas.
It contains a monochrome digital camera which can take clear, high quality photographs day or night without the use of external illuminators.
The 4G camera connects to a Senceive EdgeHub (with FlatMesh) unit which provides power and connectivity over the cellular network (2G/3G/4G) or existing wired ethernet networks.
Reviews
There are no reviews yet.