SS08BH
SS08BH is a triaxial broad-band seismometer designed installation in boreholes. This solution offers automatic levelling and motorised hole-lock system, wide temperature operations and safe transport. The sensor uses the symmetric architecture recovering Z,Y,X velocity signal from U,V,W homogeneous transducers; this methodology allows higher precision in reconstruction of real ground motion.
Description
- Small diameter to fit 100mm boreholes (4 inches)
- Hole lock mechanism to use the sensor at any hole deep
- Auto levelling mechanism to compensate up to +/-5°
- Ultra low noise design
- Fast setup, data are useable few minutes after deployment
- Intrinsic robustness
- Low power consumption allows unit to be used in remote installation with limited energy source
- Possibility to have embedded digitizer with accurate sync
- Detachable cable for easier transportation
Additional information
| Brands | |
|---|---|
| Configuration |
U,V,W (output to physical motion Z, Y, X) |
| Principle of operation |
Force Feedback with capacitive transducer |
| Nominal sensitivity |
1500V/m/s (customizable at order) |
| Pass-band |
120-20s to 100Hz (customizable at order) |
| Number of channels |
3 + 3 (Z, Y, X and virtual mass UVW status) |
| Dynamic range |
> 135dB in range 0.1 – 10Hz |
| Protection grade |
IP68K |
Reviews (0)
About brand
SARA electronic instruments focused on seismological, geophysical and vibrational instrumentation. their mission is to provide cost effective solutions for earthquake monitoring, risk assessment and soil exploration in all places in the world where people need to face with natural hazards.
Data Sheets
Related products
SEISMOWIN
In stock
The SEISMOWIN project consists in a suite of software that can be used for seismological, geophysical and engineering purpose. The launcher, that can be download from this page, automatically installs all the modules shown in this page, keeps them updated and gives the possibility to download the manuals.
SS08C
In stock
SS08C is a portable, compact, broad-band, triaxial sesimometer designed for quick and simple installation, wide temperature operations and safe transport. It uses the symmetric architecture recovering Z,Y,X velocity signal from U,V,W homogeneous transducers. This methodology allows higher precision in reconstruction of real ground motion.
Digital Array
In stock
The Digital Array (DA) is a modular high-speed real-time network system composed of a number of mono-, bi- or triaxial
seismographs connected in a high speed bus. An interface connecting to a PC or a complete SL06 recorder equipped with a GPS provides accurate synchronization to the bus and data recording and processing feature. Up to 8 nodes can be connected on the same branch. Several branches can work as data source over the standard TCP/IP bus and SeedLink
protocol.
DoReMi downhole
In stock
SSBH sensor is a geophysical device designed to measure vibrations in boreholes for DownHole, UpHole and CrossHole
surveys. Made from stainless steel, it is robust and rugged, and can be equipped with 4.5, 8 or 10Hz geophone sensors.
It can be used with any exploration seismograph and, naturally, with all our seismographs, especially the DoReMitm system.
SR24/SR32
In stock
The digitiser SR24 or SR32 is a 3 channels digitizer with high performance designed to digitize the signal coming from a sensor, and give the data flow in continuous with different data rates. With the possibility to record signal with very low frequencies, and with his very low thermal drift, is an excellent instrument with a very good signal-to-noise and quality/price ratio. It is considered one of the best seismic digitiser in the world. It can achieve a dynamic range of 141.5dB at 100 SPS and over 145dB at 50 SPS using the 32 bit version.
DoReMi
In stock
GeoBox
In stock
The digital seismograph GeoBox is a high-performance instrument especially suitable for recording signals for seismological and geophysical surveys such as the Horizontal/Vertical Spectral Ratio (HVSR).
The communication protocol is public, software plugins exist for SEISMOWIN, SEISLOG, SEISCOMP and EARTHWORM. The instrument's features include extreme ease of use, reliability and low power consumption.
ShakeBot
In stock
Reviews
There are no reviews yet.