Show 12

GEOLOGGER LINX CONNECT

In stock

The popular Linx data loggers now with cellular connectivity for stand-alone monitoring which can be used with all types of vibrating wire sensors. The Geologger Linx™ Connect offers all the benefits of the popular Linx data logger with the advantage of cost-efficient cellular data transmission via an internal SIM card. Excellent energy efficiency, reliable and stable transmission of readings and the sturdy construction of the data loggers means almost maintenance-free and cost-efficient data measurement.

GEOLOGGER LINX SERIES

In stock

The GeoLogger Linx™ is a range of low-cost battery powered data loggers for stand-alone monitoring which can be used with all types of vibrating wire sensors such as piezometers, load cells, crack meters, joint meters, strain gauges, pressure cells, weir monitors and extensometers, together with their associated thermistors. The large 8MB internal memory enables the storage of up to 270,000 readings. As the internal memory operates as a USB mass storage device, the data is accessible through a mini USB interface allowing data to be easily transferred to a laptop device in the field in csv format.

MLRemote

In stock

The Canary Systems® MLRemote® is a low-power, point-to-multipoint, programmable wireless datalogging system designed for demanding environments. The system was purpose designed for the mining, geotechnical, structural and environmental markets where the monitoring assets consist of numerous types of instruments, distributed over a large area, and are difficult to access. Use of proprietary communication “push” technology allows for ultra-long battery life, between 3-5 years for the standard alkaline batteries, up to 10-years when using Lithium cells. The unit can easily be placed in a variety of remote locations for long-term monitoring applications. With fewer components, MLRemote systems are less of a target on sites where theft is a concern compared to the larger, more visible, and expensive alternatives. The high performance spread spectrum radio is available in 900MHz or 2.4GHz frequencies, and a range of up to 100km (60 miles) is possible with use of gain antennas and excellent topography. Range of up to 15km (9 miles) is easily achievable using the standard antenna and most topography.

MLTDR-W-50S

In stock

The MLTDR-W-50 is a datalogger designed to automate monitoring of up to 8 coaxial cables embedded in a slope or borehole for deformation monitoring. It contains a control module, TDR interface and, optionally, an 8 channel coaxial cable multiplexer. It is equipped with an interface to read Vibrating Wire gages. These gages are typically used to monitor pore pressures along the length of the installed TDR cable. The datalogger provides connection for 2 Vibrating Wire gages, a Canary Systems® MicroMux or MiniMux multiplexer may also be installed to expand the measurement capability to 5 or 17 instruments. A 50AHr lead-acid battery provides power, and is recharged either through a 40W solar panel or an AC power connection. Communications are possible via a wireless or wired network interface. For wireless networks, a high performance ultra wide band log periodic antenna is supplied, including a lightning surge protector. An SGX 5150 is used for the Wi-Fi network interface.

ML-DAQ

In stock

The Canary Systems® MLDAQ is a powerful, rugged and reliable wireless data acquisition station for general purpose use. The MLDAQ supports measurements from a wide range of available sensors, including vibrating wire, load cells, micro-electro-mechanical (MEMs) sensors, flowmeters, linear potentiometers, thermocouples, thermistors, SDI-12 sensors, 4-20mA sensors, weather instruments such as wind sets, rain gages, temperature and humidity.  

ML-GPS

In stock

The Canary Systems® MLGPS® integrates a multi-function GPS module into a turnkey power control, battery charging and communications platform, specifically designed for geotechnical and structural monitoring applications. It is available in two cost-effective variants: a portable version for quick deployments, and a fixed version for permanent deployments. All MLGPS units feature a NEMA rated enclosure including battery and solar panel. MLGPS uses differential GPS to achieve its high precision. The precision GPS receiver is able to track GPS L1 and GLONASS L1 signals. An optional upgrade allows for additional constellations such as Galileo, BeiDou-3, QZSS, and IRNSS, as well as expansion up to 555 channels. Precisions range from 2.5 mm (0.1 in) to 25 mm (1 in).

MLBase

In stock

The MLBase™ is a communications base station for the MLRemote® wireless datalogging system. The MLBase provides for queuing all inbound and outbound data communications with MLRemote. Network communication options for the MLBase include both Wi-Fi and Cellular integration. The MLBase offers long-distance communications and low power in a small form factor when paired with the MLRemote. Low-data rate communications of up to 15 kilometers (9 miles) is achievable, and up to 100 kilometers (60 miles) with the use of gain antennas.

For automatic data acquisition.