PT100 RTD Sensor Node
The PT100 RTD Sensor Node enables precise temperature monitoring using a variety of sensors. The PT100 RTD can have an optional integrated IX triaxial tilt sensor for combined tilt and temperature sensing in one unit.
It uses the integrated radio transceiver to report its measurements through Senceive’s wireless communications network to a Gateway.
Typical temperature monitoring applications of the PT100 RTD Sensor Node include:
- Steel structures
- Rail, for critical rail temperature alerting
- Concrete structures, including during curing
- Heating, ventilation, and air conditioning (HVAC) systems
Features
- Waterproof, robust connectors for simple installation
- Accuracy of 0.1°C
- Can have -IX triaxial tilt sensor integrated for combined tilt and temperature sensing in one unit
- Integrated long life battery
- 12-15 year battery life
- Versatile mounting options
- Waterproof to IP66 / IP67 / IP68
- Firmware is remotely upgradeable over the air via the gateway reducing costly site visits (FlatMesh)
- Easily deployed
| Brands | Senceive |
|---|---|
| Accuracy | ± 0.1°C |
| Resolution | 0.01°C |
| Stimulus Type | Constant Current |
| Tilt Sensor (-IX variant only) | Availably |
Related products
STRAIN GAUGE PIEZOMETER SGP-3400 SERIES
In stock
The SGP-3400 Series of strain gauge piezometers are designed for monitoring soil pore pressure or changes in water level and are also suitable for dynamic monitoring such as pumping tests.
They are accurate, highly-reliable and suitable for use in the harsh environments often found within civil engineering including water wells, boreholes, dams, reservoirs, rivers, tanks or any other body of water.
DRIVE-IN PIEZOMETERS WP-3400 & SGP-3500 SERIES
In stock
Drive-in piezometers, also referred to as push-in piezometers, are designed for installing in soft clays, organic or fine grained cohesionless soils typically with a SPT-N value less than 10. They are available with a CPT fitting or 1” BSP thread.
Depending on the depth and type of soil, they can either be pushed directly into the soil from ground level to the required depth or pushed into the base of a CPT test or drilled borehole.
OPTICAL DISPLACEMENT SENSOR NODE
In stock
TRIAXIAL TILT SENSOR NODE
In stock
IPI-X IN PLACE INC – EXT
In stock
HUMIDITY & CORROSION (CorroDec®2G)
In stock
The structural infrastructure must always meet requirements such as performance, stability and durability. These requirements will have a lasting effect on our mobility in the future. The corrosion risk and the corrosion activity of the reinforcing steel largely define these requirements and are determined by various impact and material parameters.
INCLINOMETER SPIRAL SENSOR
In stock
MAGNETIC EXTENSOMETER GXM RANGE
In stock
The GEO-XM settlement system is a magnet extensometer system used typically to monitor settlement and heave in foundations, excavations and embankments.
Data received identifies the depth and position where settlement has occurred as well as the total amount of settlement.
It can also be installed behind retaining structures, such as sheet piles and slurry walls, and above underground openings, such as tunnels and shafts.
Reviews
There are no reviews yet.