ML-GPS
The Canary Systems® MLGPS® integrates a multi-function GPS module into a turnkey power control, battery charging and communications platform, specifically designed for geotechnical and structural monitoring applications. It is available in two cost-effective variants: a portable version for quick deployments, and a fixed version for permanent deployments. All MLGPS units feature a NEMA rated enclosure including battery and solar panel.
MLGPS uses differential GPS to achieve its high precision. The precision GPS receiver is able to track GPS L1 and GLONASS L1 signals. An optional upgrade allows for additional constellations such as Galileo, BeiDou-3, QZSS, and IRNSS, as well as expansion up to 555 channels. Precisions range from 2.5 mm (0.1 in) to 25 mm (1 in).
Description
MLGPS units ship with a 32GB SD card already inserted into the MLGPS module. The SD card allows the unit to collect and store raw data and utilize Offline Mode for more than 300 days of offline storage. This is ideal for units in remote locations with unreliable Wi-Fi connectivity.
MLGPS is capable of reading its own panel temperature, humidity, and recording the status of a switch closure input. Several status LEDs are used for reporting basic system operations including power, charge, GPS status, LAN link, and LAN active. The system integrates a smart lead-acid battery charge controller for the 12V battery. MLGPS can also perform firmware updates over a network, making system updates very simple to manage.
Additional information
| Brands |
|---|
Reviews (0)
About brand
Canary develops a web-based software platform that aggregates geotechnical/geomechanical data from numerous sources into a single platform that provides analytics and other tools including automated alarming and reporting. Canary also develops and sells electronic hardware consist of Dataloggers, Data acquisition systems & Multiplexers for a variety of applications related to weather, water, energy, gas flux and turbulence, infrastructure, and soil.
Data Sheets
Related products
IPX IN-PLACE EXTENSOMETER
In stock
The In-Place Extensometer (IPX) offers automated monitoring of standard magnetic extensometer installations. The system is designed for a simple, adaptable installation with a single cable connection at the top of the borehole. Its large measurement range accommodates large levels of settlement or heave, and ease of adjustment means it can be reconfigured for changed site conditions such as embankment filling or cutting.
PRESSURE TRANSDUCER VWT-9000 SERIES
In stock
The Geosense® VWT-9000 Series of Pressure Transducers are designed to be connected directly into hydraulic or pneumatic pressure lines by means of a 1/4” BSPF thread. Other thread sizes are available on request.
They are typically used to monitor uplift pressures within dams and to enable manual standpipe piezometers to be upgraded into an automated data acquisition system.
TILT BEAM
In stock
The Tilt Beam is a lightweight, rigid aluminium beam that is used in conjunction with a Triaxial Tilt Node, a NanoPlus or a NanoMacro.
The tilt beam has been successfully used in many applications, including:
- Movement monitoring of any structure
- Longitudinal settlement
- Tunnel convergence/divergence
- Lateral displacements
DIGITAL PIEZOMETER – dPiezo
In stock
STANDPIPE PIEZOMETER
In stock
PENDULUM SYSTEM
In stock
HPS-3500 (Hanging) and IPS-3000 (Inverted) Pendulums are used to measure the tilt or rotation by measuring the relative internal horizontal displacement of points along a true vertical line. Each has a tensioned, stainless steel wire and the effects of the earth gravitational forces to guarantee a perfectly vertical line between a fixed point and a tensioning mechanism. Typical applications include concrete dams, bridges and high rise buildings.
INCLINOMETER CASING QJ
In stock
HUMIDITY & CORROSION (CorroDec®2G)
In stock
The structural infrastructure must always meet requirements such as performance, stability and durability. These requirements will have a lasting effect on our mobility in the future. The corrosion risk and the corrosion activity of the reinforcing steel largely define these requirements and are determined by various impact and material parameters.
Reviews
There are no reviews yet.