HUMIDITY & CORROSION (CorroDec®2G)
The structural infrastructure must always meet requirements such as performance, stability and durability. These requirements will have a lasting effect on our mobility in the future. The corrosion risk and the corrosion activity of the reinforcing steel largely define these requirements and are determined by various impact and material parameters.
The unique monitoring solution for corrosion, moisture, potential
The structural infrastructure must always meet requirements such as performance, stability and durability. These requirements will have a lasting effect on our mobility in the future. The corrosion risk and the corrosion activity of the reinforcing steel largely define these requirements and are determined by various impact and material parameters. Moisture and corrosion behavior are among the most important of these parameters in interaction with external environmental influences, cause invisible damage inside the concrete structure. The early detection of corrosion activities inside the concrete structure essentially determine the costs for its maintenance and repair.
CorroDec® sensors can be installed without great effort both before concreting and afterwards, with the help of a core hole drilling. Typical application areas are hydraulic structures, bridges, multi-storey car parks or shaft structures, etc.
| Brands | infrasolute |
|---|---|
| Working temperature | -15 to + 55 degrees Celsius |
| Measuring range | -25 to + 55 degrees Celsius 50Ohm to 20 KOhm |
| Type of measurement | Resistance measurement sensor wire |
| Data verification | Internal function test with data transmission |
Related products
VW PIEZOMETER VWP-3000 SERIES
In stock
IPX IN-PLACE EXTENSOMETER
In stock
The In-Place Extensometer (IPX) offers automated monitoring of standard magnetic extensometer installations. The system is designed for a simple, adaptable installation with a single cable connection at the top of the borehole. Its large measurement range accommodates large levels of settlement or heave, and ease of adjustment means it can be reconfigured for changed site conditions such as embankment filling or cutting.
BOREHOLE ROD EXTENSOMETER
In stock
The Geosense® GEO-XB2 borehole rod type extensometer range is used to measure and locate settlement, displacement and deformation in soil and rock.
It consists of a reference head and one or more in-hole anchors each of which is placed at a known depth and connected to the reference head by either a rigid or flexible rod running inside a flexible sleeve, which keeps the rod de-bonded from the grout.
DRIVE-IN PIEZOMETERS WP-3400 & SGP-3500 SERIES
In stock
Drive-in piezometers, also referred to as push-in piezometers, are designed for installing in soft clays, organic or fine grained cohesionless soils typically with a SPT-N value less than 10. They are available with a CPT fitting or 1” BSP thread.
Depending on the depth and type of soil, they can either be pushed directly into the soil from ground level to the required depth or pushed into the base of a CPT test or drilled borehole.
NANO TRIAXIAL TILT SENSOR
In stock
The Nano range uses the same core platform as our other tilt sensors, so it can deliver a similar level of performance and reliability, all in a small and robust enclosure. Nanos have been successfully used in many applications, including:
- Tunnel distortion
- Tunnel heave/settlement
- Embankment slippage (used in conjunction with stake mounts)
- Structural movement
- Rail track heave/settlement
- Rail trackbed cant and twist
SUBMERSIBLE TILT METER
In stock
STANDPIPE PIEZOMETER
In stock
IPI-X IN PLACE INC – EXT
In stock

Reviews
There are no reviews yet.