VelBox
VELBOX is a compact all-in-one high resolution seismograph. Based on the reliable and proven-on field SL06 recorder it embeds three seismometers, allowing to put on the field an efficient and fast to deploy instrument. Within seconds from the switch on it is operative. It can embeds different types of seismometers from cheap 4.5Hz geophones to high resolution 0.1Hz sensors
The VelBox is a high performance seismograph based on our SL06. It has 3 velocitimeters embedded (SS-45/20 or SS-10/05/02/01) so it can record high resolution seismic signal and save the data with his USB flash memory embedded.
Different kind of communication protocol are provided, like FTP client and server and different kind of transmission protocol, like SeedLink for real time data transmission, are provided for the software like Earthworm, Seislog, SeiscomP, etc.
All of this is possible with our software SEISMONUX, that is flexible and ease to use.
The low level of noise allows to record the data with a very high quality that can reach and in some cases to have better quality in comparison with the high-end instruments.
The robust case, milled from a solid aluminum block can resist a very high load level in case of collapse, protecting the data in the memory.
| Brands | Sara Electronic instruments |
|---|---|
| Power consumption | < 2.5W in standard working mode |
| Number of channel | (6 channels for hybrid version with embedded MEMS accelerometer) |
| Input range | depending on embedded sensors, ask for details |
| Dynamic range | 144dB system, true 24 bit from 0.1-10Hz @ 200 SPS 32 bit system version available with up to 162dB dynamic range |
| Sampling rates | 1,2,5,10,20,50,100,200,250,300,400,480,500,600,800,1000,1500 Hz |
| Mass Memory | microSD and USB |
| Data Format | GSEcm6, GSEint, SAC, SAF, SEED |
| Recording | continuous and/or on-event trigger |
| Triggering | multimode STA/LTA, amplitude, IP voting and scheduled; fully independent high/low/band pass filter; pre/post event: 1 to 10000 seconds |
| Protection grade | IP68 |
| Housing | machined out of a solid block of aluminum, wall mount possible |
| Dimensions | 205x170x107 mm (weight: about 4 kg, depending on embedded sensors) |
Related products
SA-10
In stock
SA10 is a true force balance accelerometer (FBA) designed for seismic or industrial application suitable for both weak or strong motion monitoring. The sensor is entirely designed in our laboratory and it offers an excellent dynamic range, compactness and sensitivity, that make this sensor one of the best products available in the international market.
Digital Array
In stock
The Digital Array (DA) is a modular high-speed real-time network system composed of a number of mono-, bi- or triaxial
seismographs connected in a high speed bus. An interface connecting to a PC or a complete SL06 recorder equipped with a GPS provides accurate synchronization to the bus and data recording and processing feature. Up to 8 nodes can be connected on the same branch. Several branches can work as data source over the standard TCP/IP bus and SeedLink
protocol.
SS08BH
In stock
SS08BH is a triaxial broad-band seismometer designed installation in boreholes. This solution offers automatic levelling and motorised hole-lock system, wide temperature operations and safe transport. The sensor uses the symmetric architecture recovering Z,Y,X velocity signal from U,V,W homogeneous transducers; this methodology allows higher precision in reconstruction of real ground motion.
SS-BHV
In stock
The SSBHV is a versatile multipurpose sensor solution. It finds specific application for microseism studies and noise surveys. It is available with different sensors solutions, among the most popular are the standard electrodynamic sensors up to the extended band sensors or force balance accelerometers. The passive spring locking system and the original removable
orientation tool allow the unit to be used for both permanent and mobile stations.
DoReMi downhole
In stock
SSBH sensor is a geophysical device designed to measure vibrations in boreholes for DownHole, UpHole and CrossHole
surveys. Made from stainless steel, it is robust and rugged, and can be equipped with 4.5, 8 or 10Hz geophone sensors.
It can be used with any exploration seismograph and, naturally, with all our seismographs, especially the DoReMitm system.
SL06
In stock
GeoBox
In stock
The digital seismograph GeoBox is a high-performance instrument especially suitable for recording signals for seismological and geophysical surveys such as the Horizontal/Vertical Spectral Ratio (HVSR).
The communication protocol is public, software plugins exist for SEISMOWIN, SEISLOG, SEISCOMP and EARTHWORM. The instrument's features include extreme ease of use, reliability and low power consumption.
ShakeBot
In stock
Reviews
There are no reviews yet.