Show 12

VW HYDROSTATIC PROFILER

In stock

The Vibrating Wire Hydrostatic Profiler is used for the measurement of subsurface settlement. The sensor measures the hydrostatic head of liquid between the sensor and the reservoir locations.

IPX IN-PLACE EXTENSOMETER

In stock

The In-Place Extensometer (IPX) offers automated monitoring of standard magnetic extensometer installations. The system is designed for a simple, adaptable installation with a single cable connection at the top of the borehole. Its large measurement range accommodates large levels of settlement or heave, and ease of adjustment means it can be reconfigured for changed site conditions such as embankment filling or cutting.

BOREHOLE ROD EXTENSOMETER

In stock

The Geosense® GEO-XB2 borehole rod type extensometer range is used to measure and locate settlement, displacement and deformation in soil and rock. It consists of a reference head and one or more in-hole anchors each of which is placed at a known depth and connected to the reference head by either a rigid or flexible rod running inside a flexible sleeve, which keeps the rod de-bonded from the grout.

MULTI-POINT VW PIEZOMETER

In stock

Fully grouted installation permits multiple piezometers to be simply and reliably installed in a single borehole. The piezometer string and grout pipe are placed in the borehole and cement-bentonite grout is pumped until the borehole is filled.

STRAIN GAUGE ANCHOR LOAD CELLS SGLC-7000

In stock

The SGLC 7000 series load cell consists of a cylinder of high strength steel with a series of electrical resistance strain gauges connected around the periphery as a Wheatstone Bridge that compensates for unevenly distributed loads and provides a single mV/V signal output. They are manufactured with a center hole to accommodate anchors, rock bolts and tendons.

PT100 RTD Sensor Node

In stock

The PT100 RTD Sensor Node enables precise temperature monitoring using a variety of sensors. The PT100 RTD can have an optional integrated IX triaxial tilt sensor for combined tilt and temperature sensing in one unit.
It uses the integrated radio transceiver to report its measurements through Senceive’s wireless communications network to a Gateway. Typical temperature monitoring applications of the PT100 RTD Sensor Node include:
  • Steel structures
  • Rail, for critical rail temperature alerting
  • Concrete structures, including during curing
  • Heating, ventilation, and air conditioning (HVAC) systems

VW LOAD CELL VWLC-5050

In stock

The VWLC 5050 series of Vibrating Wire Load Cells consist of a solid cylinder of high strength steel with 3 vibrating wire strain sensors mounted parallel to the longitudinal axis arranged equidistant around the circumference which measure the compression of the cylinder under load.

PRO-WEA Wind direction sensor

In stock

  • Protection against electrostatic discharge