- High compactness and low weight
- Ultra low noise design
- Fast setup, data are useable few minutes after deployment
- Easy deployment, similar to a geophone for the size
- Allow use in shallow posthole without any special care
- Intrinsic robustness due to low weight and size
- Different foot options are available for different surfaces.
- Low power consumption allows unit to be used in remote installation with limited energy source
SS08C
SS08C is a portable, compact, broad-band, triaxial sesimometer designed for quick and simple installation, wide temperature operations and safe transport. It uses the symmetric architecture recovering Z,Y,X velocity signal from U,V,W homogeneous transducers. This methodology allows higher precision in reconstruction of real ground motion.
Categories: Geophysical & Seismic Instruments, Sensors
Description
Additional information
Brands | |
---|---|
Configuration |
U,V,W (output to physical motion Z, Y, X) |
Principle of operation |
Force Feedback with capacitive transducer |
Nominal sensitivity |
1500V/m/s* (customizable at order) |
Pass-band |
120-20s to 100Hz (customizable at order) |
Dynamic range |
> 135dB in range 0.1 – 10Hz (see chart) |
Protection grade |
IP68K |
Reviews (0)
Be the first to review “SS08C” Cancel reply
About brand
SARA electronic instruments focused on seismological, geophysical and vibrational instrumentation. their mission is to provide cost effective solutions for earthquake monitoring, risk assessment and soil exploration in all places in the world where people need to face with natural hazards.
Data Sheets
Related products
AceBox
In stock
Rated 0 out of 5
ACEBOX is a compact all-in-one high resolution accelerograph. Based on the reliable and proven on field SL06 recorder it embeds three force balance accelerometers of the SA10 series, allowing to put on the field an efficient and fast to deploy instrument. Within seconds from the switch on it is operative.
SS08BH
In stock
Rated 0 out of 5
SS08BH is a triaxial broad-band seismometer designed installation in boreholes. This solution offers automatic levelling and motorised hole-lock system, wide temperature operations and safe transport. The sensor uses the symmetric architecture recovering Z,Y,X velocity signal from U,V,W homogeneous transducers; this methodology allows higher precision in reconstruction of real ground motion.
SA-10
In stock
Rated 0 out of 5
SA10 is a true force balance accelerometer (FBA) designed for seismic or industrial application suitable for both weak or strong motion monitoring. The sensor is entirely designed in our laboratory and it offers an excellent dynamic range, compactness and sensitivity, that make this sensor one of the best products available in the international market.
VelBox
In stock
Rated 0 out of 5
VELBOX is a compact all-in-one high resolution seismograph. Based on the reliable and proven-on field SL06 recorder it embeds three seismometers, allowing to put on the field an efficient and fast to deploy instrument. Within seconds from the switch on it is operative. It can embeds different types of seismometers from cheap 4.5Hz geophones to high resolution 0.1Hz sensors
SR24/SR32
In stock
Rated 0 out of 5
The digitiser SR24 or SR32 is a 3 channels digitizer with high performance designed to digitize the signal coming from a sensor, and give the data flow in continuous with different data rates. With the possibility to record signal with very low frequencies, and with his very low thermal drift, is an excellent instrument with a very good signal-to-noise and quality/price ratio. It is considered one of the best seismic digitiser in the world. It can achieve a dynamic range of 141.5dB at 100 SPS and over 145dB at 50 SPS using the 32 bit version.
SL06
In stock
Rated 0 out of 5
GEOEXPLORER
In stock
Rated 0 out of 5
Digital Array
In stock
Rated 0 out of 5
The Digital Array (DA) is a modular high-speed real-time network system composed of a number of mono-, bi- or triaxial
seismographs connected in a high speed bus. An interface connecting to a PC or a complete SL06 recorder equipped with a GPS provides accurate synchronization to the bus and data recording and processing feature. Up to 8 nodes can be connected on the same branch. Several branches can work as data source over the standard TCP/IP bus and SeedLink
protocol.
Reviews
There are no reviews yet.