STRAIN GAUGE ANCHOR LOAD CELLS SGLC-7000
The SGLC 7000 series load cell consists of a cylinder of high strength steel with a series of electrical resistance strain gauges connected around the periphery as a Wheatstone Bridge that compensates for unevenly distributed loads and provides a single mV/V signal output.
They are manufactured with a center hole to accommodate anchors, rock bolts and tendons.
Description
When the load cell is subjected to load the resistance of the strain gauges will change and the output signal is directly proportional to the applied load. The load cells are compensated for temperature variations often found during normal operating environments and have in-built lightning protection.
Connection to the load cell is via a heavy duty multi-core sheathed cable which can be connected to a direct portable readout, switched terminal units or a data logging system. Mounting surfaces should be flat and parallel for optimum performance and the use of bearing plates and load distribution plates is recommended.
The bearing plate (provided locally) is normally made to suit specific site requirements and the load distribution plate (supplied by Geosense) should be inserted between the load cell and the anchor head.
Additional information
| Brands | |
|---|---|
| Range |
300 to 2500kN |
| Bridge Resistance |
1400Ω |
| Over Range |
up to 130% |
| Sensitivity |
2.0 mV/V +/-0.15% |
| Accuracy |
< ±0.3% FS |
| Temperature Compensation |
-10°C / +60°C |
| Output Signal |
1.5 mV/V |
| Power Input |
5 to 15 V DC |
| Operating Temperature |
-20ºC to + 70ºC |
Reviews (0)
About brand
Geosense Ltd is one of Europe’s leading manufacturers and suppliers of instruments to the geotechnical, civil engineering, mining and environmental industries.
Geosense products are used globally in major projects in more than 68 countries. With a comprehensive in-house design and manufacturing capability, we can provide products not only to tight deadlines but also to suit custom-engineered solutions for specific project requirements.
Geosense specialises in the manufacture of vibrating wire and MEMS sensors, which are used to produce a wide range of instruments. In addition we manufacture automated data acquisition systems to complement our sensors, including wireless systems.
Data Sheets
Related products
PRESSURE TRANSDUCER VWT-9000 SERIES
In stock
The Geosense® VWT-9000 Series of Pressure Transducers are designed to be connected directly into hydraulic or pneumatic pressure lines by means of a 1/4” BSPF thread. Other thread sizes are available on request.
They are typically used to monitor uplift pressures within dams and to enable manual standpipe piezometers to be upgraded into an automated data acquisition system.
OPTICAL DISPLACEMENT SENSOR NODE
In stock
SUBMERSIBLE TILT METER
In stock
PORTABLE MEMS INCLINOMETER
In stock
The MEMS Portable Inclinometer system utilises modern communication and Smart devices to enable the tilt data generated by the probe to be managed, stored and transferred directly from site via FTP, API, email or other communication platforms.
It is available for vertical, inclined and horizontal applications.
IPI-X IN PLACE INC – EXT
In stock
TILT BEAM MEMS
In stock
MEMS Tilt Beams are designed for attachment to structures, on either a vertical or horizontal surface, for the measurement of tilt or differential settlement.
They consist of a highly accurate MEMS sensor housed in a fully sealed enclosure which is mounted on a lightweight rigid GRP beam. This can be mounted onto the structure using special anchors. The GRP beam has a very low coefficient of thermal expansion meaning that thermal affects are minimised.
IMAGING & CAMERA
In stock
The FlatMesh 4G Camera is a best in class solar powered solution for static imagery in remote or industrial areas.
It contains a monochrome digital camera which can take clear, high quality photographs day or night without the use of external illuminators.
The 4G camera connects to a Senceive EdgeHub (with FlatMesh) unit which provides power and connectivity over the cellular network (2G/3G/4G) or existing wired ethernet networks.
HUMIDITY & CORROSION (CorroDec®2G)
In stock
The structural infrastructure must always meet requirements such as performance, stability and durability. These requirements will have a lasting effect on our mobility in the future. The corrosion risk and the corrosion activity of the reinforcing steel largely define these requirements and are determined by various impact and material parameters.
Reviews
There are no reviews yet.