TOTAL EARTH PRESSURE CELLS
TPC-4000 series Total Earth Pressure cells are designed to measure total pressure (effective stress and pore water pressure) in soils and at the interface between structures and the wall of excavation.
Models 4010 and 4020 are designed to measure soil pressures on structures. They are fitted with an extra thick back plate on one side which is placed against the structure so as to avoid any warping of the cell. The other side has a thin plate welded to the back plate which provides sensitive measurement of soil pressures.
They are constructed from two stainless steel plates, welded around their periphery with the narrow gap between the plates filled with hydraulic fluid.
External pressure on the outside surfaces of the cell squeezes the two plates together creating an internal fluid pressure. A length of stainless steel tube connects the cell to a pressure transducer which converts the fluid pressure into an electrical signal which can be directly readout or transmitted to a data logging system.
Available with vibrating wire or 4-20mA signal outputs.
| Brands | Geosense |
|---|---|
| Pressure Range | VWTPC 345kPa – 20.7MPa; SGTPC 100 kPa – 3.5MPa |
| Over range | 150% FS |
| Resolution | ± 0.025% FS, Infinite |
| Accuracy | ± 0.1% FS |
| Linearity | <0.5% FS |
| Outer diameter | 165, 245, 320mm |
| Active diameter | 150, 230, 305mm |
| Operating temperature | -20°C to +80°C; -30°C to +95°C |
Related products
BOREHOLE ROD EXTENSOMETER
In stock
The Geosense® GEO-XB2 borehole rod type extensometer range is used to measure and locate settlement, displacement and deformation in soil and rock.
It consists of a reference head and one or more in-hole anchors each of which is placed at a known depth and connected to the reference head by either a rigid or flexible rod running inside a flexible sleeve, which keeps the rod de-bonded from the grout.
PRESSURE TRANSDUCER VWT-9000 SERIES
In stock
The Geosense® VWT-9000 Series of Pressure Transducers are designed to be connected directly into hydraulic or pneumatic pressure lines by means of a 1/4” BSPF thread. Other thread sizes are available on request.
They are typically used to monitor uplift pressures within dams and to enable manual standpipe piezometers to be upgraded into an automated data acquisition system.
OPTICAL DISPLACEMENT SENSOR NODE
In stock
NANO TRIAXIAL TILT SENSOR
In stock
The Nano range uses the same core platform as our other tilt sensors, so it can deliver a similar level of performance and reliability, all in a small and robust enclosure. Nanos have been successfully used in many applications, including:
- Tunnel distortion
- Tunnel heave/settlement
- Embankment slippage (used in conjunction with stake mounts)
- Structural movement
- Rail track heave/settlement
- Rail trackbed cant and twist
IN-PLACE INCLINOMETER (IPI)
In stock
WATER LEVEL METER
In stock
PENDULUM SYSTEM
In stock
HPS-3500 (Hanging) and IPS-3000 (Inverted) Pendulums are used to measure the tilt or rotation by measuring the relative internal horizontal displacement of points along a true vertical line. Each has a tensioned, stainless steel wire and the effects of the earth gravitational forces to guarantee a perfectly vertical line between a fixed point and a tensioning mechanism. Typical applications include concrete dams, bridges and high rise buildings.
MAGNETIC EXTENSOMETER GXM RANGE
In stock
The GEO-XM settlement system is a magnet extensometer system used typically to monitor settlement and heave in foundations, excavations and embankments.
Data received identifies the depth and position where settlement has occurred as well as the total amount of settlement.
It can also be installed behind retaining structures, such as sheet piles and slurry walls, and above underground openings, such as tunnels and shafts.
Reviews
There are no reviews yet.