SISTER BAR REBAR STRAIN METER VWS-4000
The VWS-4000 series vibrating wire Sister Bars and Rebar Strain Meters are designed to be embedded in concrete to measure strains due to imposed loads.
SISTER BAR: The VWS-4000 Sister Bar is installed by tying it alongside an existing length of rebar within the cage. Available in two diameters: 12 and 16mm.
REBAR STRAIN METER: The VWS-4001 Rebar Strain Meter is installed by welding it into the existing rebar cage at a location within the structure where loads can be accurately passed from the concrete into the gauge. Available in various diameters to match the size of the rebar cage into which it is to be welded.
| Brands | Geosense |
|---|---|
| Thermistor | 3k 0hms at 25°C |
| Over range | +20% |
| Resolution | 0.4με |
| Accuracy | ±0.25%FS |
| Effective Gauge Length | 50mm (nominal) |
| De-bonded Length | 175mm |
| Overall Length | 915mm |
| Standard Diameter | 12, 16mm |
Related products
DRIVE-IN PIEZOMETERS WP-3400 & SGP-3500 SERIES
In stock
Drive-in piezometers, also referred to as push-in piezometers, are designed for installing in soft clays, organic or fine grained cohesionless soils typically with a SPT-N value less than 10. They are available with a CPT fitting or 1” BSP thread.
Depending on the depth and type of soil, they can either be pushed directly into the soil from ground level to the required depth or pushed into the base of a CPT test or drilled borehole.
TRIAXIAL TILT SENSOR NODE
In stock
PORTABLE MEMS INCLINOMETER
In stock
The MEMS Portable Inclinometer system utilises modern communication and Smart devices to enable the tilt data generated by the probe to be managed, stored and transferred directly from site via FTP, API, email or other communication platforms.
It is available for vertical, inclined and horizontal applications.
IN-PLACE INCLINOMETER (IPI)
In stock
IPI-X IN PLACE INC – EXT
In stock
TILT BEAM MEMS
In stock
MEMS Tilt Beams are designed for attachment to structures, on either a vertical or horizontal surface, for the measurement of tilt or differential settlement.
They consist of a highly accurate MEMS sensor housed in a fully sealed enclosure which is mounted on a lightweight rigid GRP beam. This can be mounted onto the structure using special anchors. The GRP beam has a very low coefficient of thermal expansion meaning that thermal affects are minimised.
INCLINOMETER SPIRAL SENSOR
In stock
MAGNETIC EXTENSOMETER GXM RANGE
In stock
The GEO-XM settlement system is a magnet extensometer system used typically to monitor settlement and heave in foundations, excavations and embankments.
Data received identifies the depth and position where settlement has occurred as well as the total amount of settlement.
It can also be installed behind retaining structures, such as sheet piles and slurry walls, and above underground openings, such as tunnels and shafts.
Reviews
There are no reviews yet.