MLMux5 Multiplexer
The Canary Systems® MLMux5 multiplexer is designed to expand the number of instruments that can be read by a compatible Automatic Data Acquisition System (ADAS). It supports two switching modes, 5-channel by 4-wire switching, or 10-channel by 2-wire switching. A switch on the face of the module configures the switching mode.
The use of low contact resistance relays means almost universal instrument support, a high degree of lightning protection on the control lines, and virtually infinite channel isolation. The MLMux5 is compatible with a wide range of instruments, including vibrating wire, resistance strain gage, thermocouples, linear potentiometers, and 4-20 mA, among others.
Description
Two control inputs activate the MLMux5 and then advance through the channels. Logic levels for either the enable or clocking input can utilize 3.3V to 12V logic input, with a maximum input of 16V. These control inputs are compatible with a variety of control modules including those manufactured by Campbell Scientific, Sutron and dataTaker.
Transient protection in the form of plasma surge arrestors on the control inputs provides high reliability from electrical transients, whether ESD or lightning. The power inputs are also equipped with transient protection and reverse-polarity protection.
All components, such as terminal blocks, relays, and flash microcontroller, have been selected for ultra-high reliability and function, helping ensure years of reliable and trouble-free operation in demanding environments that may include high heat, humidity, and/or dust.
Additional information
| Brands |
|---|
Reviews (0)
About brand
Canary develops a web-based software platform that aggregates geotechnical/geomechanical data from numerous sources into a single platform that provides analytics and other tools including automated alarming and reporting. Canary also develops and sells electronic hardware consist of Dataloggers, Data acquisition systems & Multiplexers for a variety of applications related to weather, water, energy, gas flux and turbulence, infrastructure, and soil.
Data Sheets
Related products
VWPHT-3600 SERIES
In stock
The VWPHT-3600 series High Temperature Piezometers are suitable for the extreme environments of temperature and pressure found within applications such as geothermal heat and enhanced oil recovery systems including steam assisted gravity drainage (SAGD) and cyclic steam stimulation (CSS). They are capable of monitoring high temperatures up to 250°C and pressures up to 34.5 MPa.
DRIVE-IN PIEZOMETERS WP-3400 & SGP-3500 SERIES
In stock
Drive-in piezometers, also referred to as push-in piezometers, are designed for installing in soft clays, organic or fine grained cohesionless soils typically with a SPT-N value less than 10. They are available with a CPT fitting or 1” BSP thread.
Depending on the depth and type of soil, they can either be pushed directly into the soil from ground level to the required depth or pushed into the base of a CPT test or drilled borehole.
OPTICAL DISPLACEMENT SENSOR NODE
In stock
TRIAXIAL TILT SENSOR NODE
In stock
DIGITAL PIEZOMETER – dPiezo
In stock
IPI-X IN PLACE INC – EXT
In stock
INCLINOMETER CASING QJ
In stock
IMAGING & CAMERA
In stock
The FlatMesh 4G Camera is a best in class solar powered solution for static imagery in remote or industrial areas.
It contains a monochrome digital camera which can take clear, high quality photographs day or night without the use of external illuminators.
The 4G camera connects to a Senceive EdgeHub (with FlatMesh) unit which provides power and connectivity over the cellular network (2G/3G/4G) or existing wired ethernet networks.
Reviews
There are no reviews yet.