STRAIN GAUGE PIEZOMETER SGP-3400 SERIES
The SGP-3400 Series of strain gauge piezometers are designed for monitoring soil pore pressure or changes in water level and are also suitable for dynamic monitoring such as pumping tests.
They are accurate, highly-reliable and suitable for use in the harsh environments often found within civil engineering including water wells, boreholes, dams, reservoirs, rivers, tanks or any other body of water.
The sensor is housed in a robust stainless steel sealed body with a porous filter tip, which are available in different porosities to suit specific site conditions.
It comprises a highly sensitive stainless steel diaphragm onto which a Wheatstone bridge strain gauge is mounted and connected to a signal-conditioning board to convert to a 4-20mA output within the piezometer housing.
When liquid pressure is applied to the diaphragm it causes the Wheatstone bridge strain gauge to output a signal, which is directly proportional to the applied pressure.
They are available in standard or vented versions and can be read by simple hand held readout units or integrated into a data logger for fully automated monitoring.
| Brands | Geosense |
|---|---|
| Pressure Range | 100, 200, 350, 700, 2000, 3500 kPa |
| Over Range | 1.5 |
| Accuracy | <0.1% FS |
| Thermal error | <0.04% FS/°C |
| Temperature range | -20 to +80°C |
| Output | 4-20 mA |
Related products
VWPHT-3600 SERIES
In stock
The VWPHT-3600 series High Temperature Piezometers are suitable for the extreme environments of temperature and pressure found within applications such as geothermal heat and enhanced oil recovery systems including steam assisted gravity drainage (SAGD) and cyclic steam stimulation (CSS). They are capable of monitoring high temperatures up to 250°C and pressures up to 34.5 MPa.
TILT BEAM
In stock
The Tilt Beam is a lightweight, rigid aluminium beam that is used in conjunction with a Triaxial Tilt Node, a NanoPlus or a NanoMacro.
The tilt beam has been successfully used in many applications, including:
- Movement monitoring of any structure
- Longitudinal settlement
- Tunnel convergence/divergence
- Lateral displacements
DIGITAL PIEZOMETER – dPiezo
In stock
STANDPIPE PIEZOMETER
In stock
PENDULUM SYSTEM
In stock
HPS-3500 (Hanging) and IPS-3000 (Inverted) Pendulums are used to measure the tilt or rotation by measuring the relative internal horizontal displacement of points along a true vertical line. Each has a tensioned, stainless steel wire and the effects of the earth gravitational forces to guarantee a perfectly vertical line between a fixed point and a tensioning mechanism. Typical applications include concrete dams, bridges and high rise buildings.
HUMIDITY & CORROSION (CorroDec®2G)
In stock
The structural infrastructure must always meet requirements such as performance, stability and durability. These requirements will have a lasting effect on our mobility in the future. The corrosion risk and the corrosion activity of the reinforcing steel largely define these requirements and are determined by various impact and material parameters.
MAGNETIC EXTENSOMETER GXM RANGE
In stock
The GEO-XM settlement system is a magnet extensometer system used typically to monitor settlement and heave in foundations, excavations and embankments.
Data received identifies the depth and position where settlement has occurred as well as the total amount of settlement.
It can also be installed behind retaining structures, such as sheet piles and slurry walls, and above underground openings, such as tunnels and shafts.
REED SWITCH PROBE
In stock

Reviews
There are no reviews yet.