SS08
SS08 is a portable, broad-band, triaxial sesimometer designed for quick and simple installation, wide temperature operations and safe transport. It uses the symmetric architecture recovering Z,Y,X velocity signal from U,V,W homogeneous transducers. This methodology allows higher precision in reconstruction of real ground motion.
Description
The SS-08 is our BroadBand sensor, entirely designed and manufactured in our lab, made for fast deployment with a very wide range of operating temperature. The sensors are embedded in a solid case of steel and aluminum designed to reduce the mechanic stress with atmosphere pressure variation.
The architecture of SS-08 and the accurate component selection give a very low noise curve and very low power consumption (<0.5W). The high tilt tolerance allows to put in recording just after few minutes after deployment.
Additional information
| Brands | |
|---|---|
| Configuration |
U,V,W (output to physical motion Z, Y, X) |
| Principle of operation |
Force Feedback with capacitive transducer |
| Nominal sensitivity |
1500V/m/s* (customizable at order) |
| Pass-band |
180-20s to 100Hz (customizable at order) |
| Number of channels |
3 + 3 (Z, Y, X and virtual mass UVW status) |
| Dynamic range |
> 150dB in range 0.1 – 10Hz (see chart) |
| Max. tilt tolerance |
+/- 3° with levelling feet |
| Protection grade |
IP68K |
Reviews (0)
About brand
SARA electronic instruments focused on seismological, geophysical and vibrational instrumentation. their mission is to provide cost effective solutions for earthquake monitoring, risk assessment and soil exploration in all places in the world where people need to face with natural hazards.
Data Sheets
Related products
GEOEXPLORER
In stock
Digital Array
In stock
The Digital Array (DA) is a modular high-speed real-time network system composed of a number of mono-, bi- or triaxial
seismographs connected in a high speed bus. An interface connecting to a PC or a complete SL06 recorder equipped with a GPS provides accurate synchronization to the bus and data recording and processing feature. Up to 8 nodes can be connected on the same branch. Several branches can work as data source over the standard TCP/IP bus and SeedLink
protocol.
SS-BHV
In stock
The SSBHV is a versatile multipurpose sensor solution. It finds specific application for microseism studies and noise surveys. It is available with different sensors solutions, among the most popular are the standard electrodynamic sensors up to the extended band sensors or force balance accelerometers. The passive spring locking system and the original removable
orientation tool allow the unit to be used for both permanent and mobile stations.
AceBox
In stock
ACEBOX is a compact all-in-one high resolution accelerograph. Based on the reliable and proven on field SL06 recorder it embeds three force balance accelerometers of the SA10 series, allowing to put on the field an efficient and fast to deploy instrument. Within seconds from the switch on it is operative.
VelBox
In stock
VELBOX is a compact all-in-one high resolution seismograph. Based on the reliable and proven-on field SL06 recorder it embeds three seismometers, allowing to put on the field an efficient and fast to deploy instrument. Within seconds from the switch on it is operative. It can embeds different types of seismometers from cheap 4.5Hz geophones to high resolution 0.1Hz sensors
SR24/SR32
In stock
The digitiser SR24 or SR32 is a 3 channels digitizer with high performance designed to digitize the signal coming from a sensor, and give the data flow in continuous with different data rates. With the possibility to record signal with very low frequencies, and with his very low thermal drift, is an excellent instrument with a very good signal-to-noise and quality/price ratio. It is considered one of the best seismic digitiser in the world. It can achieve a dynamic range of 141.5dB at 100 SPS and over 145dB at 50 SPS using the 32 bit version.
DoReMi
In stock
GeoBox
In stock
The digital seismograph GeoBox is a high-performance instrument especially suitable for recording signals for seismological and geophysical surveys such as the Horizontal/Vertical Spectral Ratio (HVSR).
The communication protocol is public, software plugins exist for SEISMOWIN, SEISLOG, SEISCOMP and EARTHWORM. The instrument's features include extreme ease of use, reliability and low power consumption.
Reviews
There are no reviews yet.