DoReMi
The DoReMi© seismograph is a digital telemetry system with the recording electronics embedded in the cable. This architecture has several benefits, especially in the modularity and possibility to operate in any position of the seismic line.
Our seismograph DoReMi is an instrument that reflect our production philosophy. Fully modular, with a very high quality/price ratio is an instrument with digital telemetry with definite advantages.
All the electrical part (digitiser) are distributed along the cable. That allows to choose the amount of channels and giving the immunity from electro-magnetic pollution.
The battery embedded in the interface and in the booster make the instrument independent and safer.
The digitalization close to the geophone, with our 16bit or 24bit channels, reduce the noise level recorded, and the digital transmission delete the data loss and the crosstalk phenomena.
The possibility to use different geophones and different sensor designed for downhole survey (SS-BH-5C) with different acquisition techniques, makes the instrument extremely flexible, giving the possibility to perform a very wide range of geophysical survey.
APPLICATIONS:
The DoReMi is usable for all the geophysical active exploration techniques (MASW, Refraction, Reflexion, Downhole) and passive techniques (ReMi, ESAC/SPAC)
| Brands | Sara Electronic instruments |
|---|---|
| Input type: | For geophones |
| No. of bits | 16 & 24 |
| Input impedance | >20 kΩ |
| Common mode rejection | > 80 dB |
| Filters (IIR o 0 Phase) | Low pass, High pass, notch and customizable |
| Max sampling lag between Ch | < 30 ppm |
| Max error between trigger Ch. | < 0.2 us |
| Power consumption | ≈ 0.3 W per Ch. |
| Instrument chain max length | 1000 m |
| Best results geophones | 4.5 Hz High Gain 80 V/m/s |
| Data Format | .drm, SEG-2, SEGY, .saf, .csv |
Related products
SEISMOWIN
In stock
The SEISMOWIN project consists in a suite of software that can be used for seismological, geophysical and engineering purpose. The launcher, that can be download from this page, automatically installs all the modules shown in this page, keeps them updated and gives the possibility to download the manuals.
SS08C
In stock
SS08C is a portable, compact, broad-band, triaxial sesimometer designed for quick and simple installation, wide temperature operations and safe transport. It uses the symmetric architecture recovering Z,Y,X velocity signal from U,V,W homogeneous transducers. This methodology allows higher precision in reconstruction of real ground motion.
Digital Array
In stock
The Digital Array (DA) is a modular high-speed real-time network system composed of a number of mono-, bi- or triaxial
seismographs connected in a high speed bus. An interface connecting to a PC or a complete SL06 recorder equipped with a GPS provides accurate synchronization to the bus and data recording and processing feature. Up to 8 nodes can be connected on the same branch. Several branches can work as data source over the standard TCP/IP bus and SeedLink
protocol.
AceBox
In stock
ACEBOX is a compact all-in-one high resolution accelerograph. Based on the reliable and proven on field SL06 recorder it embeds three force balance accelerometers of the SA10 series, allowing to put on the field an efficient and fast to deploy instrument. Within seconds from the switch on it is operative.
DoReMi downhole
In stock
SSBH sensor is a geophysical device designed to measure vibrations in boreholes for DownHole, UpHole and CrossHole
surveys. Made from stainless steel, it is robust and rugged, and can be equipped with 4.5, 8 or 10Hz geophone sensors.
It can be used with any exploration seismograph and, naturally, with all our seismographs, especially the DoReMitm system.
SL06
In stock
VelBox
In stock
VELBOX is a compact all-in-one high resolution seismograph. Based on the reliable and proven-on field SL06 recorder it embeds three seismometers, allowing to put on the field an efficient and fast to deploy instrument. Within seconds from the switch on it is operative. It can embeds different types of seismometers from cheap 4.5Hz geophones to high resolution 0.1Hz sensors
SR24/SR32
In stock
The digitiser SR24 or SR32 is a 3 channels digitizer with high performance designed to digitize the signal coming from a sensor, and give the data flow in continuous with different data rates. With the possibility to record signal with very low frequencies, and with his very low thermal drift, is an excellent instrument with a very good signal-to-noise and quality/price ratio. It is considered one of the best seismic digitiser in the world. It can achieve a dynamic range of 141.5dB at 100 SPS and over 145dB at 50 SPS using the 32 bit version.

Reviews
There are no reviews yet.