New
Digital Interface Node
The Digital Interface Node is a robust IP66/1P67 rated digital data logger that transforms your data collection from manual to automated sampling. This wireless digital data logger is compatible with a large variety of sensors that carry a digital output and enables a simple connection to the Senceive back-end & front-end platforms. Interact and manage your data online and change reporting times and thresholds remotely.
The Digital Interface Node is compatible with InfraGuard™. Choose this responsive reporting option when you need dynamic reporting. This means your sensors can be self-managing tools that react to changing site conditions. Features include accelerated sampling, triggered site photos and escalated alerting, with near real-time notifications.
Description
Features
- Versatile mounting options
- Compatible with FlatMesh™ and GeoWAN™ wireless communications platforms
- Waterproof to IP66 / IP67
- Low power, long battery life with changeable batteries
- Automatic power sharing and switchover between battery and external DC supply
- Firmware is remotely upgradeable over the air via the gateway, reducing costly site visits (FlatMesh™)
- Extremely low noise performance
- NFC compatibility, enabling on the spot adjustments to the node
- “Sleep mode” functionality
- Power sensors requiring up to 20 Watts
- Configurable output voltage enabling longer sensor chains
- Compatible with our InfraGuard™ responsive reporting option for networked and dynamic reporting (FlatMesh™)
- Hardware support for these connection protocols: RS232, RS422, RS485, SDI-12, MODBUS and CAN
The Digital Interface Node is compatible with a wide variety of digital structural, environmental, and geotechnical sensors including:
- Inclinometers
- Extensometers
- Piezometers
- Load/Pressure Cells
- Hydrostatic Pressure cells
- Temperature
- Wind Velocity
- Vibration
- Water Level
- Hydrostatic Level Cells
- Stress/Strain
- Crack Movement
Additional information
| Brands | |
|---|---|
| Digital Interfaces |
RS232 |
| Output Voltage (DC) |
0.8 V to 22 V |
| Output Current |
Up to 2A |
Reviews (0)
About brand
Since 2005, Senceive has been singularly focused on bringing intelligent wireless condition monitoring to civil engineering and rail applications. Senceive is widely seen as the global leader for wireless remote condition monitoring solutions, with more than 30,000 sensors installed in 2020 alone.
Related products
VWPHT-3600 SERIES
In stock
The VWPHT-3600 series High Temperature Piezometers are suitable for the extreme environments of temperature and pressure found within applications such as geothermal heat and enhanced oil recovery systems including steam assisted gravity drainage (SAGD) and cyclic steam stimulation (CSS). They are capable of monitoring high temperatures up to 250°C and pressures up to 34.5 MPa.
STRAIN GAUGE PIEZOMETER SGP-3400 SERIES
In stock
The SGP-3400 Series of strain gauge piezometers are designed for monitoring soil pore pressure or changes in water level and are also suitable for dynamic monitoring such as pumping tests.
They are accurate, highly-reliable and suitable for use in the harsh environments often found within civil engineering including water wells, boreholes, dams, reservoirs, rivers, tanks or any other body of water.
DRIVE-IN PIEZOMETERS WP-3400 & SGP-3500 SERIES
In stock
Drive-in piezometers, also referred to as push-in piezometers, are designed for installing in soft clays, organic or fine grained cohesionless soils typically with a SPT-N value less than 10. They are available with a CPT fitting or 1” BSP thread.
Depending on the depth and type of soil, they can either be pushed directly into the soil from ground level to the required depth or pushed into the base of a CPT test or drilled borehole.
SUBMERSIBLE TILT METER
In stock
TILT BEAM
In stock
The Tilt Beam is a lightweight, rigid aluminium beam that is used in conjunction with a Triaxial Tilt Node, a NanoPlus or a NanoMacro.
The tilt beam has been successfully used in many applications, including:
- Movement monitoring of any structure
- Longitudinal settlement
- Tunnel convergence/divergence
- Lateral displacements
IPI-X IN PLACE INC – EXT
In stock
HUMIDITY & CORROSION (CorroDec®2G)
In stock
The structural infrastructure must always meet requirements such as performance, stability and durability. These requirements will have a lasting effect on our mobility in the future. The corrosion risk and the corrosion activity of the reinforcing steel largely define these requirements and are determined by various impact and material parameters.
MAGNETIC EXTENSOMETER GXM RANGE
In stock
The GEO-XM settlement system is a magnet extensometer system used typically to monitor settlement and heave in foundations, excavations and embankments.
Data received identifies the depth and position where settlement has occurred as well as the total amount of settlement.
It can also be installed behind retaining structures, such as sheet piles and slurry walls, and above underground openings, such as tunnels and shafts.
Reviews
There are no reviews yet.