VWPHT-3600 SERIES
The VWPHT-3600 series High Temperature Piezometers are suitable for the extreme environments of temperature and pressure found within applications such as geothermal heat and enhanced oil recovery systems including steam assisted gravity drainage (SAGD) and cyclic steam stimulation (CSS). They are capable of monitoring high temperatures up to 250°C and pressures up to 34.5 MPa.
Description
They use the well-proven vibrating wire technology of converting fluid pressures onto a pressure sensitive diaphragm which when deflected causes a change in tension and the corresponding change of frequency of the wire. In addition, an internal high temperature thermistor allows the temperature at the piezometer location to be measured.
Manufactured from high temperature and corrosion-resistant materials throughout, together with a comprehensive temperature calibration, they provide high accuracy stable long-term data with no zero shift.
The specially-designed Tubular Encapsulated Cable (TEC) is both high temperature resistant and highly flexible for easy installation within boreholes or above ground.
Also available as a pressure transducer with a threaded connection in the base.
Additional information
| Brands | |
|---|---|
| Pressure range |
2.1, 3.5, 5.2, 6.9, 10.4, 13.8, 20.7, 34.5 MPa |
| Calibration range |
VWPHT-3600: +20 to + 200°C; VWPHT-3610: +20 to + 250°C |
| Operating range |
VWPHT-3600: 0 to + 200°C; VWPHT-3610: 0 to + 250°C |
| Thermistor Type |
VWPHT-3600: 3K; VWPHT-3610: 10K |
Reviews (0)
About brand
Geosense Ltd is one of Europe’s leading manufacturers and suppliers of instruments to the geotechnical, civil engineering, mining and environmental industries.
Geosense products are used globally in major projects in more than 68 countries. With a comprehensive in-house design and manufacturing capability, we can provide products not only to tight deadlines but also to suit custom-engineered solutions for specific project requirements.
Geosense specialises in the manufacture of vibrating wire and MEMS sensors, which are used to produce a wide range of instruments. In addition we manufacture automated data acquisition systems to complement our sensors, including wireless systems.
Data Sheets
Related products
IPX IN-PLACE EXTENSOMETER
In stock
The In-Place Extensometer (IPX) offers automated monitoring of standard magnetic extensometer installations. The system is designed for a simple, adaptable installation with a single cable connection at the top of the borehole. Its large measurement range accommodates large levels of settlement or heave, and ease of adjustment means it can be reconfigured for changed site conditions such as embankment filling or cutting.
TRIAXIAL TILT SENSOR NODE
In stock
IN-PLACE INCLINOMETER (IPI)
In stock
DIGITAL PIEZOMETER – dPiezo
In stock
TILT BEAM MEMS
In stock
MEMS Tilt Beams are designed for attachment to structures, on either a vertical or horizontal surface, for the measurement of tilt or differential settlement.
They consist of a highly accurate MEMS sensor housed in a fully sealed enclosure which is mounted on a lightweight rigid GRP beam. This can be mounted onto the structure using special anchors. The GRP beam has a very low coefficient of thermal expansion meaning that thermal affects are minimised.
WATER LEVEL METER
In stock
INCLINOMETER SPIRAL SENSOR
In stock
MAGNETIC EXTENSOMETER GXM RANGE
In stock
The GEO-XM settlement system is a magnet extensometer system used typically to monitor settlement and heave in foundations, excavations and embankments.
Data received identifies the depth and position where settlement has occurred as well as the total amount of settlement.
It can also be installed behind retaining structures, such as sheet piles and slurry walls, and above underground openings, such as tunnels and shafts.
Reviews
There are no reviews yet.