SS08BH
SS08BH is a triaxial broad-band seismometer designed installation in boreholes. This solution offers automatic levelling and motorised hole-lock system, wide temperature operations and safe transport. The sensor uses the symmetric architecture recovering Z,Y,X velocity signal from U,V,W homogeneous transducers; this methodology allows higher precision in reconstruction of real ground motion.
Description
- Small diameter to fit 100mm boreholes (4 inches)
- Hole lock mechanism to use the sensor at any hole deep
- Auto levelling mechanism to compensate up to +/-5°
- Ultra low noise design
- Fast setup, data are useable few minutes after deployment
- Intrinsic robustness
- Low power consumption allows unit to be used in remote installation with limited energy source
- Possibility to have embedded digitizer with accurate sync
- Detachable cable for easier transportation
Additional information
| Brands | |
|---|---|
| Configuration |
U,V,W (output to physical motion Z, Y, X) |
| Principle of operation |
Force Feedback with capacitive transducer |
| Nominal sensitivity |
1500V/m/s (customizable at order) |
| Pass-band |
120-20s to 100Hz (customizable at order) |
| Number of channels |
3 + 3 (Z, Y, X and virtual mass UVW status) |
| Dynamic range |
> 135dB in range 0.1 – 10Hz |
| Protection grade |
IP68K |
Reviews (0)
About brand
SARA electronic instruments focused on seismological, geophysical and vibrational instrumentation. their mission is to provide cost effective solutions for earthquake monitoring, risk assessment and soil exploration in all places in the world where people need to face with natural hazards.
Data Sheets
Related products
GEOEXPLORER
In stock
SA-10
In stock
SA10 is a true force balance accelerometer (FBA) designed for seismic or industrial application suitable for both weak or strong motion monitoring. The sensor is entirely designed in our laboratory and it offers an excellent dynamic range, compactness and sensitivity, that make this sensor one of the best products available in the international market.
SS08
In stock
SS08 is a portable, broad-band, triaxial sesimometer designed for quick and simple installation, wide temperature operations and safe transport. It uses the symmetric architecture recovering Z,Y,X velocity signal from U,V,W homogeneous transducers. This methodology allows higher precision in reconstruction of real ground motion.
Digital Array
In stock
The Digital Array (DA) is a modular high-speed real-time network system composed of a number of mono-, bi- or triaxial
seismographs connected in a high speed bus. An interface connecting to a PC or a complete SL06 recorder equipped with a GPS provides accurate synchronization to the bus and data recording and processing feature. Up to 8 nodes can be connected on the same branch. Several branches can work as data source over the standard TCP/IP bus and SeedLink
protocol.
SS-BHV
In stock
The SSBHV is a versatile multipurpose sensor solution. It finds specific application for microseism studies and noise surveys. It is available with different sensors solutions, among the most popular are the standard electrodynamic sensors up to the extended band sensors or force balance accelerometers. The passive spring locking system and the original removable
orientation tool allow the unit to be used for both permanent and mobile stations.
DoReMi downhole
In stock
SSBH sensor is a geophysical device designed to measure vibrations in boreholes for DownHole, UpHole and CrossHole
surveys. Made from stainless steel, it is robust and rugged, and can be equipped with 4.5, 8 or 10Hz geophone sensors.
It can be used with any exploration seismograph and, naturally, with all our seismographs, especially the DoReMitm system.
SL06
In stock
DoReMi
In stock
Reviews
There are no reviews yet.