MiniMux Multiplexer
The MiniMux is designed to expand the number of instruments that can be read by a compatible Automatic Data Acquisition System (ADAS). It supports two switching modes, 16 channel by 4-wire switching, or 32 channel by 2-wire switching. An easily accessible board mounted switch configures the switching mode.
Low contact resistance relays provide compatibility with a wide range of instruments, including vibrating wire, resistance strain gage, thermocouples, linear potentiometers and 4-20mA, among others.
Two control inputs provide for activating the MiniMux and then advancing through the channels. The control inputs are compatible with a wide variety of control modules including those manufactured by Campbell Scientific, Sutron and Datataker. Contact Canary Systems for MCU support from other manufacturers.
Description
Transient protection on the control inputs provides high reliability from electrical transients whether ESD or lightning. The power inputs are also equipped with transient protection.
All components have been selected for ultra-high reliability and function in demanding environments that may include high heat, humidity and/or dust.
The MiniMux may be packaged directly into the Automatic Data Acquisition System (ADAS) enclosure or installed in a variety of standard enclosures. Contact Canary Systems for enclosure and cable entry options.
The complete list of features and specifications is detailed on the MiniMux Data Sheet.
Additional information
| Brands |
|---|
Reviews (0)
About brand
Canary develops a web-based software platform that aggregates geotechnical/geomechanical data from numerous sources into a single platform that provides analytics and other tools including automated alarming and reporting. Canary also develops and sells electronic hardware consist of Dataloggers, Data acquisition systems & Multiplexers for a variety of applications related to weather, water, energy, gas flux and turbulence, infrastructure, and soil.
Data Sheets
Related products
BOREHOLE ROD EXTENSOMETER
In stock
The Geosense® GEO-XB2 borehole rod type extensometer range is used to measure and locate settlement, displacement and deformation in soil and rock.
It consists of a reference head and one or more in-hole anchors each of which is placed at a known depth and connected to the reference head by either a rigid or flexible rod running inside a flexible sleeve, which keeps the rod de-bonded from the grout.
MULTI-POINT VW PIEZOMETER
In stock
DRIVE-IN PIEZOMETERS WP-3400 & SGP-3500 SERIES
In stock
Drive-in piezometers, also referred to as push-in piezometers, are designed for installing in soft clays, organic or fine grained cohesionless soils typically with a SPT-N value less than 10. They are available with a CPT fitting or 1” BSP thread.
Depending on the depth and type of soil, they can either be pushed directly into the soil from ground level to the required depth or pushed into the base of a CPT test or drilled borehole.
IN-PLACE INCLINOMETER (IPI)
In stock
DIGITAL PIEZOMETER – dPiezo
In stock
STANDPIPE PIEZOMETER
In stock
IPI-X IN PLACE INC – EXT
In stock
HUMIDITY & CORROSION (CorroDec®2G)
In stock
The structural infrastructure must always meet requirements such as performance, stability and durability. These requirements will have a lasting effect on our mobility in the future. The corrosion risk and the corrosion activity of the reinforcing steel largely define these requirements and are determined by various impact and material parameters.
Reviews
There are no reviews yet.