CABLES
Braided cable is used to ensure maximum protection and CE compliance for EMC; PUR provides excellent abrasion resistance and flexibility and LSHF (low smoke halogen free) cables are designed for increased safety in the case of fire and used extensively in underground applications. All cables are compliant with the RoHS Directive 2002/95/EC.
Vented cables are also available for use with vented transducers to allow for atmospheric compensation and armoured cables for use in applications such as dams.
Description
we use the highest quality cables made to British and European standards. They have excellent strength and flexibility which makes them ideal for installation within applications such as dams, tunnels, bridges etc.
They are suitable for direct burial within selected graded material such as clay cores and filter sand and concrete.
Various types are available to suit the wide range of sensors and applications.
Reviews (0)
Related products
VW PIEZOMETER VWP-3000 SERIES
In stock
MULTI-POINT VW PIEZOMETER
In stock
VWPHT-3600 SERIES
In stock
The VWPHT-3600 series High Temperature Piezometers are suitable for the extreme environments of temperature and pressure found within applications such as geothermal heat and enhanced oil recovery systems including steam assisted gravity drainage (SAGD) and cyclic steam stimulation (CSS). They are capable of monitoring high temperatures up to 250°C and pressures up to 34.5 MPa.
DRIVE-IN PIEZOMETERS WP-3400 & SGP-3500 SERIES
In stock
Drive-in piezometers, also referred to as push-in piezometers, are designed for installing in soft clays, organic or fine grained cohesionless soils typically with a SPT-N value less than 10. They are available with a CPT fitting or 1” BSP thread.
Depending on the depth and type of soil, they can either be pushed directly into the soil from ground level to the required depth or pushed into the base of a CPT test or drilled borehole.
PRESSURE TRANSDUCER VWT-9000 SERIES
In stock
The Geosense® VWT-9000 Series of Pressure Transducers are designed to be connected directly into hydraulic or pneumatic pressure lines by means of a 1/4” BSPF thread. Other thread sizes are available on request.
They are typically used to monitor uplift pressures within dams and to enable manual standpipe piezometers to be upgraded into an automated data acquisition system.
IPI-X IN PLACE INC – EXT
In stock
INCLINOMETER CASING XC
In stock
INCLINOMETER SPIRAL SENSOR
In stock
Reviews
There are no reviews yet.