IN-PLACE TILT METER MEMS
The MEMS In-Place Tilt Meter measures uniaxial or biaxial tilt, which is measured from the plane(s) perpendicular to the base.
It is designed to be installed in either the vertical or horizontal position by either bonding, bolting or strong magnetic fixing directly to a structure or mounting plate
Description
The tilt sensors, based on well-established MEMS technology, are mounted within a rugged, heavy-duty waterproof die-cast metal enclosure suitable for the harsh environments found within construction and building industries.
Thermal effects of the MEMS sensor is minimal but in order to compensate for the effects of temperature on the enclosure, mountings and structure, the unit is fitted with an integral thermistor.
The digital RS-485 output signal provides the ultimate in accuracy together with the advantage of being able to create a digital BUS system where all sensors can be linked together and cable qantities significantly reduced.
Each unit is individually calibrated to provide the ultimate in system accuracy and repeatability.
Additional information
| Brands | |
|---|---|
| Range |
Digital: ±5° ±10°±15°; Analogue±15° |
| Axis |
Uniaxial and biaxial |
| Signal Output |
Digital: RS-485/BUS; Analogue: +/– Volt/4-20mA |
| Resolution |
Digital 2 arc sec; Analogue 7 arc sec |
| Repeatability |
7.2 arc sec |
| Excitation |
8-15 V DC |
| Operating Temperature |
-40 to +85°C |
| Dimension |
160 x 85 x 60mm |
| Weight |
980g |
Reviews (0)
About brand
Geosense Ltd is one of Europe’s leading manufacturers and suppliers of instruments to the geotechnical, civil engineering, mining and environmental industries.
Geosense products are used globally in major projects in more than 68 countries. With a comprehensive in-house design and manufacturing capability, we can provide products not only to tight deadlines but also to suit custom-engineered solutions for specific project requirements.
Geosense specialises in the manufacture of vibrating wire and MEMS sensors, which are used to produce a wide range of instruments. In addition we manufacture automated data acquisition systems to complement our sensors, including wireless systems.
Data Sheets
Related products
PRESSURE TRANSDUCER VWT-9000 SERIES
In stock
The Geosense® VWT-9000 Series of Pressure Transducers are designed to be connected directly into hydraulic or pneumatic pressure lines by means of a 1/4” BSPF thread. Other thread sizes are available on request.
They are typically used to monitor uplift pressures within dams and to enable manual standpipe piezometers to be upgraded into an automated data acquisition system.
OPTICAL DISPLACEMENT SENSOR NODE
In stock
PORTABLE MEMS INCLINOMETER
In stock
The MEMS Portable Inclinometer system utilises modern communication and Smart devices to enable the tilt data generated by the probe to be managed, stored and transferred directly from site via FTP, API, email or other communication platforms.
It is available for vertical, inclined and horizontal applications.
DIGITAL PIEZOMETER – dPiezo
In stock
STANDPIPE PIEZOMETER
In stock
PENDULUM SYSTEM
In stock
HPS-3500 (Hanging) and IPS-3000 (Inverted) Pendulums are used to measure the tilt or rotation by measuring the relative internal horizontal displacement of points along a true vertical line. Each has a tensioned, stainless steel wire and the effects of the earth gravitational forces to guarantee a perfectly vertical line between a fixed point and a tensioning mechanism. Typical applications include concrete dams, bridges and high rise buildings.
INCLINOMETER CASING XC
In stock
REED SWITCH PROBE
In stock
Reviews
There are no reviews yet.