VW PIEZOMETER VWP-3000 SERIES
The VWP-3000 Series of Vibrating Wire piezometers use the well-proven method of converting fluid pressures on a sensitive diaphragm into a frequency signal.
FEATURES
- Reliable long-term performance
- Rugged, suitable for demanding environments
- High accuracy
- Insensitive to long cable lengths
The VWP-3000 Series of Vibrating Wire piezometers use the well-proven method of converting fluid pressures on a sensitive diaphragm into a frequency signal.
Frequency signals are particularly suitable for the demanding environment of Civil Engineering applications, since the signals are capable of long transmission distances without degradation, tolerant of wet wiring conditions and resistant to external electrical noise.
Key applications include measuring pore pressure in soils and rocks and fluid pressures in hydro-fractures and pump tests.
Models in the VWP-3000 range are:
- VWP-3000 (STANDARD) Standard construction with high & low air entry filters to measure groundwater elevations and pore pressures.
- VWP-3310 (STANDARD VENTED) Standard construction but vented to compensate for barometric pressure changes. Available with high & low air entry filters.
- VWP-3100 (HEAVY DUTY) Heavy duty body for direct burial in fills and dam embankments. Available with high & low air entry filters, standard and heavy duty cable.
- VWP-3200 (LOW PRESSURE) Low pressure version to measure groundwater elevations and pore pressures. Available with high & low air entry filters.
- VWP-3300 (LOW PRESSURE VENTED) Low pressure vented version to compensate for barometric pressure changes. Available with high & low air entry filters.
- VWP-3400 (DRIVE-IN) Drive-in version available for use with SPT rods.
- VWP-3401 (DRIVE-IN) Drive-in version available for use with 1” BSP adaptor.
| Brands | Geosense |
|---|---|
| Pressure Range | 345, 518, 690 kPa 1, 2, 3.5, 5, 7 10, 20 MPa |
| Over Range Pressure | 1.5 |
| Resolution | 0.025% FS |
| Accuracy | ± 0.1% FS |
| Non Linearity | <0.5% FS |
| Calbibration Temp Range | – 20 to + 80 °C |
| Thermal Effect | <0.05% FS/°C |
| Materials | 316 Stainless Steel |
| Operating Temp Range | 0 to +80°C |
| Over Voltage Protection | 90V Gas Plasma Arrester |
| Thermistor | 3k Ohms @ 25°C |
| Frequency Range | 1850-3500 Hz |
Geosense specialises in the manufacture of vibrating wire and MEMS sensors, which are used to produce a wide range of instruments. In addition we manufacture automated data acquisition systems to complement our sensors and a range of inherently safe pneumatic pumps for use in the environmental sector.
Related products
BOREHOLE ROD EXTENSOMETER
In stock
The Geosense® GEO-XB2 borehole rod type extensometer range is used to measure and locate settlement, displacement and deformation in soil and rock.
It consists of a reference head and one or more in-hole anchors each of which is placed at a known depth and connected to the reference head by either a rigid or flexible rod running inside a flexible sleeve, which keeps the rod de-bonded from the grout.
DRIVE-IN PIEZOMETERS WP-3400 & SGP-3500 SERIES
In stock
Drive-in piezometers, also referred to as push-in piezometers, are designed for installing in soft clays, organic or fine grained cohesionless soils typically with a SPT-N value less than 10. They are available with a CPT fitting or 1” BSP thread.
Depending on the depth and type of soil, they can either be pushed directly into the soil from ground level to the required depth or pushed into the base of a CPT test or drilled borehole.
IN-PLACE TILT METER MEMS
In stock
SUBMERSIBLE TILT METER
In stock
IPI-X IN PLACE INC – EXT
In stock
PENDULUM SYSTEM
In stock
HPS-3500 (Hanging) and IPS-3000 (Inverted) Pendulums are used to measure the tilt or rotation by measuring the relative internal horizontal displacement of points along a true vertical line. Each has a tensioned, stainless steel wire and the effects of the earth gravitational forces to guarantee a perfectly vertical line between a fixed point and a tensioning mechanism. Typical applications include concrete dams, bridges and high rise buildings.
IMAGING & CAMERA
In stock
The FlatMesh 4G Camera is a best in class solar powered solution for static imagery in remote or industrial areas.
It contains a monochrome digital camera which can take clear, high quality photographs day or night without the use of external illuminators.
The 4G camera connects to a Senceive EdgeHub (with FlatMesh) unit which provides power and connectivity over the cellular network (2G/3G/4G) or existing wired ethernet networks.
INCLINOMETER SPIRAL SENSOR
In stock
Reviews
There are no reviews yet.