GeoWAN 4G Gateway
The GeoWAN 4G Gateway acts as an always-on base station for a GeoWAN wireless sensor network. It sends data samples to the cloud using an ethernet connection or cellular networks (3G or LTE). Some models also support connecting to a Wi-Fi access point.
Although typically one gateway can cover an entire monitoring zone, additional gateways can be installed with no further configuration allowing for redundant data backhaul and improved network coverage.
No fixed IP address is required for the cellular service; the Gateway simply initiates the connection with Senceive’s WebMonitor software over the Internet.
Description
Features
- Integrated LTE, UMTS/HSPA+ and GSM/GPRS/EDGE Modem
- Waterproof, industrial design with rugged aluminium enclosure
- Incorporates bracket for mounting to pole or wall
- All components are waterproof to IP67, even when using Ethernet
- Gateway firmware is remotely upgradeable over the air reducing costly site visits
- Wide temperature range suitable for extreme conditions
Additional information
| Brands | |
|---|---|
| Housing Material |
Die cast aluminium |
| International Protection Marking |
IP67 |
| Operating Temperature |
-40°C to +70°C |
| Mounting Options |
Wall and pole mounting available with included mounting plate |
Reviews (0)
About brand
Since 2005, Senceive has been singularly focused on bringing intelligent wireless condition monitoring to civil engineering and rail applications. Senceive is widely seen as the global leader for wireless remote condition monitoring solutions, with more than 30,000 sensors installed in 2020 alone.
Data Sheets
Related products
VW PIEZOMETER VWP-3000 SERIES
In stock
IPX IN-PLACE EXTENSOMETER
In stock
The In-Place Extensometer (IPX) offers automated monitoring of standard magnetic extensometer installations. The system is designed for a simple, adaptable installation with a single cable connection at the top of the borehole. Its large measurement range accommodates large levels of settlement or heave, and ease of adjustment means it can be reconfigured for changed site conditions such as embankment filling or cutting.
BOREHOLE ROD EXTENSOMETER
In stock
The Geosense® GEO-XB2 borehole rod type extensometer range is used to measure and locate settlement, displacement and deformation in soil and rock.
It consists of a reference head and one or more in-hole anchors each of which is placed at a known depth and connected to the reference head by either a rigid or flexible rod running inside a flexible sleeve, which keeps the rod de-bonded from the grout.
VWPHT-3600 SERIES
In stock
The VWPHT-3600 series High Temperature Piezometers are suitable for the extreme environments of temperature and pressure found within applications such as geothermal heat and enhanced oil recovery systems including steam assisted gravity drainage (SAGD) and cyclic steam stimulation (CSS). They are capable of monitoring high temperatures up to 250°C and pressures up to 34.5 MPa.
TILT BEAM
In stock
The Tilt Beam is a lightweight, rigid aluminium beam that is used in conjunction with a Triaxial Tilt Node, a NanoPlus or a NanoMacro.
The tilt beam has been successfully used in many applications, including:
- Movement monitoring of any structure
- Longitudinal settlement
- Tunnel convergence/divergence
- Lateral displacements
IMAGING & CAMERA
In stock
The FlatMesh 4G Camera is a best in class solar powered solution for static imagery in remote or industrial areas.
It contains a monochrome digital camera which can take clear, high quality photographs day or night without the use of external illuminators.
The 4G camera connects to a Senceive EdgeHub (with FlatMesh) unit which provides power and connectivity over the cellular network (2G/3G/4G) or existing wired ethernet networks.
INCLINOMETER CASING XC
In stock
INCLINOMETER SPIRAL SENSOR
In stock
Reviews
There are no reviews yet.