![rain[e] observer](https://terrasense.ae/wp-content/uploads/2023/11/erain-observe-300x300.jpg)
FlatMesh 4G Gateway
The FlatMesh 4G Gateway is a fully integrated unit which provides all the functionality required to operate a FlatMesh network in a remote location.
No fixed IP address is required for the cellular service; the Gateway simply initiates the connection with Senceive WebMonitor software over the internet.
Description
- Integrated Twelve Band LTE, Seven Band UMTS/HSPA+ and Quad Band GSM/GPRS/EDGE Modem for worldwide use
- Integrated solar charging circuit connected to internal lithium-ion rechargeable battery pack (no external battery pack)
- Fully operational, including FlatMesh and cellular radios, for up to three weeks on internal battery
- On-board industrial-grade flash memory card for data buffering and backup
- Incorporates bracket for mounting to pole or wall
- Waterproof connection to solar panel or other DC power supply
- All components waterproof to IP67
- Firmware is remotely upgradeable over the air reducing costly site visits
- Extended temperature range battery option available for extreme conditions
- Micro-USB connector for maintenance and local data access
Additional information
| Brands | |
|---|---|
| Housing Material |
Die cast aluminium body |
| International Protection Marking |
IP67 |
| Mounting Options |
Combination wall / pole mount bracket included |
Reviews (0)
About brand
Since 2005, Senceive has been singularly focused on bringing intelligent wireless condition monitoring to civil engineering and rail applications. Senceive is widely seen as the global leader for wireless remote condition monitoring solutions, with more than 30,000 sensors installed in 2020 alone.
Data Sheets
Related products
VW PIEZOMETER VWP-3000 SERIES
In stock
STRAIN GAUGE PIEZOMETER SGP-3400 SERIES
In stock
The SGP-3400 Series of strain gauge piezometers are designed for monitoring soil pore pressure or changes in water level and are also suitable for dynamic monitoring such as pumping tests.
They are accurate, highly-reliable and suitable for use in the harsh environments often found within civil engineering including water wells, boreholes, dams, reservoirs, rivers, tanks or any other body of water.
DRIVE-IN PIEZOMETERS WP-3400 & SGP-3500 SERIES
In stock
Drive-in piezometers, also referred to as push-in piezometers, are designed for installing in soft clays, organic or fine grained cohesionless soils typically with a SPT-N value less than 10. They are available with a CPT fitting or 1” BSP thread.
Depending on the depth and type of soil, they can either be pushed directly into the soil from ground level to the required depth or pushed into the base of a CPT test or drilled borehole.
PRESSURE TRANSDUCER VWT-9000 SERIES
In stock
The Geosense® VWT-9000 Series of Pressure Transducers are designed to be connected directly into hydraulic or pneumatic pressure lines by means of a 1/4” BSPF thread. Other thread sizes are available on request.
They are typically used to monitor uplift pressures within dams and to enable manual standpipe piezometers to be upgraded into an automated data acquisition system.
OPTICAL DISPLACEMENT SENSOR NODE
In stock
TRIAXIAL TILT SENSOR NODE
In stock
IN-PLACE INCLINOMETER (IPI)
In stock
IPI-X IN PLACE INC – EXT
In stock
Reviews
There are no reviews yet.