SS08
SS08 is a portable, broad-band, triaxial sesimometer designed for quick and simple installation, wide temperature operations and safe transport. It uses the symmetric architecture recovering Z,Y,X velocity signal from U,V,W homogeneous transducers. This methodology allows higher precision in reconstruction of real ground motion.
Categories: Geophysical & Seismic Instruments, Sensors
Description
The SS-08 is our BroadBand sensor, entirely designed and manufactured in our lab, made for fast deployment with a very wide range of operating temperature. The sensors are embedded in a solid case of steel and aluminum designed to reduce the mechanic stress with atmosphere pressure variation.
The architecture of SS-08 and the accurate component selection give a very low noise curve and very low power consumption (<0.5W). The high tilt tolerance allows to put in recording just after few minutes after deployment.
Additional information
| Brands | |
|---|---|
| Configuration |
U,V,W (output to physical motion Z, Y, X) |
| Principle of operation |
Force Feedback with capacitive transducer |
| Nominal sensitivity |
1500V/m/s* (customizable at order) |
| Pass-band |
180-20s to 100Hz (customizable at order) |
| Number of channels |
3 + 3 (Z, Y, X and virtual mass UVW status) |
| Dynamic range |
> 150dB in range 0.1 – 10Hz (see chart) |
| Max. tilt tolerance |
+/- 3° with levelling feet |
| Protection grade |
IP68K |
Reviews (0)
Be the first to review “SS08” Cancel reply
About brand
SARA electronic instruments focused on seismological, geophysical and vibrational instrumentation. their mission is to provide cost effective solutions for earthquake monitoring, risk assessment and soil exploration in all places in the world where people need to face with natural hazards.
Data Sheets
Related products
SEISMOWIN
In stock
Rated 0 out of 5
The SEISMOWIN project consists in a suite of software that can be used for seismological, geophysical and engineering purpose. The launcher, that can be download from this page, automatically installs all the modules shown in this page, keeps them updated and gives the possibility to download the manuals.
SA-10
In stock
Rated 0 out of 5
SA10 is a true force balance accelerometer (FBA) designed for seismic or industrial application suitable for both weak or strong motion monitoring. The sensor is entirely designed in our laboratory and it offers an excellent dynamic range, compactness and sensitivity, that make this sensor one of the best products available in the international market.
SS08C
In stock
Rated 0 out of 5
SS08C is a portable, compact, broad-band, triaxial sesimometer designed for quick and simple installation, wide temperature operations and safe transport. It uses the symmetric architecture recovering Z,Y,X velocity signal from U,V,W homogeneous transducers. This methodology allows higher precision in reconstruction of real ground motion.
Digital Array
In stock
Rated 0 out of 5
The Digital Array (DA) is a modular high-speed real-time network system composed of a number of mono-, bi- or triaxial
seismographs connected in a high speed bus. An interface connecting to a PC or a complete SL06 recorder equipped with a GPS provides accurate synchronization to the bus and data recording and processing feature. Up to 8 nodes can be connected on the same branch. Several branches can work as data source over the standard TCP/IP bus and SeedLink
protocol.
SS-BHV
In stock
Rated 0 out of 5
The SSBHV is a versatile multipurpose sensor solution. It finds specific application for microseism studies and noise surveys. It is available with different sensors solutions, among the most popular are the standard electrodynamic sensors up to the extended band sensors or force balance accelerometers. The passive spring locking system and the original removable
orientation tool allow the unit to be used for both permanent and mobile stations.
DoReMi downhole
In stock
Rated 0 out of 5
SSBH sensor is a geophysical device designed to measure vibrations in boreholes for DownHole, UpHole and CrossHole
surveys. Made from stainless steel, it is robust and rugged, and can be equipped with 4.5, 8 or 10Hz geophone sensors.
It can be used with any exploration seismograph and, naturally, with all our seismographs, especially the DoReMitm system.
SL06
In stock
Rated 0 out of 5
ShakeBot
In stock
Rated 0 out of 5

Reviews
There are no reviews yet.