MAGNETIC EXTENSOMETER GXM RANGE
The GEO-XM settlement system is a magnet extensometer system used typically to monitor settlement and heave in foundations, excavations and embankments.
Data received identifies the depth and position where settlement has occurred as well as the total amount of settlement.
It can also be installed behind retaining structures, such as sheet piles and slurry walls, and above underground openings, such as tunnels and shafts.
Categories: Extensometers, Geo-Structural Instruments, Settlement Monitors
Description
The system comprises a central access tube along which magnetic targets are positioned at various locations. Settlement is measured by the relative position of the magnetic targets using a Reed Switch Probe lowered down through the central access casing.
There are several variations to suit individual applications:
- GXM-100 Central access tubing and spider magnets for use in boreholes
- GXM-100P Central access tubing and settlement plates for use in fill
- GXM-100T Central access tubing with telescopic joints for larger movement
- GXM-200 Combined settlement/heave and inclination using inclinometer casing as the access tubing with spider magnets
- GXM-200P Combined settlement/heave and inclination using inclinometer casing as the access tubing with settlement plates
- GXM-200T Combined settlement/heave and inclination using inclinometer casing with telescopic joints for larger movement
- GXM-300 Central access tubing de-bonded by an outer corrugated pipe with magnetic targets
- GXM-300i Combined settlement/heave and inclination using inclinometer casing as the access tubing de-bonded by an outer corrugated pipe with magnetic targets
Additional information
Brands |
---|
Reviews (0)
Be the first to review “MAGNETIC EXTENSOMETER GXM RANGE” Cancel reply
About brand
Geosense Ltd is one of Europe’s leading manufacturers and suppliers of instruments to the geotechnical, civil engineering, mining and environmental industries.
Geosense products are used globally in major projects in more than 68 countries. With a comprehensive in-house design and manufacturing capability, we can provide products not only to tight deadlines but also to suit custom-engineered solutions for specific project requirements.
Geosense specialises in the manufacture of vibrating wire and MEMS sensors, which are used to produce a wide range of instruments. In addition we manufacture automated data acquisition systems to complement our sensors, including wireless systems.
Data Sheets
Related products
VWPHT-3600 SERIES
In stock
Rated 0 out of 5
The VWPHT-3600 series High Temperature Piezometers are suitable for the extreme environments of temperature and pressure found within applications such as geothermal heat and enhanced oil recovery systems including steam assisted gravity drainage (SAGD) and cyclic steam stimulation (CSS). They are capable of monitoring high temperatures up to 250°C and pressures up to 34.5 MPa.
STRAIN GAUGE PIEZOMETER SGP-3400 SERIES
In stock
Rated 0 out of 5
The SGP-3400 Series of strain gauge piezometers are designed for monitoring soil pore pressure or changes in water level and are also suitable for dynamic monitoring such as pumping tests.
They are accurate, highly-reliable and suitable for use in the harsh environments often found within civil engineering including water wells, boreholes, dams, reservoirs, rivers, tanks or any other body of water.
DRIVE-IN PIEZOMETERS WP-3400 & SGP-3500 SERIES
In stock
Rated 0 out of 5
Drive-in piezometers, also referred to as push-in piezometers, are designed for installing in soft clays, organic or fine grained cohesionless soils typically with a SPT-N value less than 10. They are available with a CPT fitting or 1” BSP thread.
Depending on the depth and type of soil, they can either be pushed directly into the soil from ground level to the required depth or pushed into the base of a CPT test or drilled borehole.
TRIAXIAL TILT SENSOR NODE
In stock
Rated 0 out of 5
SUBMERSIBLE TILT METER
In stock
Rated 0 out of 5
PORTABLE MEMS INCLINOMETER
In stock
Rated 0 out of 5
The MEMS Portable Inclinometer system utilises modern communication and Smart devices to enable the tilt data generated by the probe to be managed, stored and transferred directly from site via FTP, API, email or other communication platforms.
It is available for vertical, inclined and horizontal applications.
INCLINOMETER CASING QJ
In stock
Rated 0 out of 5
REED SWITCH PROBE
In stock
Rated 0 out of 5
Reviews
There are no reviews yet.