EXTENSOMETER GEO-XW100
The GEO-XW100 Rotary Wire Extensometer is designed to monitor the changes in distance between two anchor points up to a maximum of 30 meters apart.
It comprises a rotary potentiometric displacement gauge, an opposing anchor and a stainless steel wire that runs between the displacement gauge and the opposing anchor. With a wire extension kit, the length of the wire can be extended up to a maximum distance of 30 meters.
Description
The displacement gauge is housed within a rugged steel enclosure with a mounting plate for horizontal or vertical mounting.
Two options for installation are available as follows:
- Exposed wire in combination with expansion anchor and eyebolt typically for attaching to rock or concrete.
- Wire running within a protective sleeve where the bottom anchor is mounted in the bottom cap at the end of the protective sleeve. The protective sleeves can either be mounted on posts above ground or buried typically used for slope and/or landslide monitoring.
Additional information
| Brands | |
|---|---|
| Sensor type |
Potentiometric linear transducer |
| Displacement range |
1800mm to 8300mm (model dependent) |
| Accuracy |
± 1mm (dependent on temperature) |
| Resolution |
Infinite |
| Non linearity |
± 0.25% FS (1800mm to 4300mm); ± 0.5% FS (4800mm to 8300mm) |
| Repeatability |
± 0.03mm |
| Output signal |
4-20mA |
| Power supply |
12-30 VDC |
Reviews (0)
About brand
Geosense Ltd is one of Europe’s leading manufacturers and suppliers of instruments to the geotechnical, civil engineering, mining and environmental industries.
Geosense products are used globally in major projects in more than 68 countries. With a comprehensive in-house design and manufacturing capability, we can provide products not only to tight deadlines but also to suit custom-engineered solutions for specific project requirements.
Geosense specialises in the manufacture of vibrating wire and MEMS sensors, which are used to produce a wide range of instruments. In addition we manufacture automated data acquisition systems to complement our sensors, including wireless systems.
Data Sheets
Related products
BOREHOLE ROD EXTENSOMETER
In stock
The Geosense® GEO-XB2 borehole rod type extensometer range is used to measure and locate settlement, displacement and deformation in soil and rock.
It consists of a reference head and one or more in-hole anchors each of which is placed at a known depth and connected to the reference head by either a rigid or flexible rod running inside a flexible sleeve, which keeps the rod de-bonded from the grout.
MULTI-POINT VW PIEZOMETER
In stock
IN-PLACE TILT METER MEMS
In stock
PORTABLE MEMS INCLINOMETER
In stock
The MEMS Portable Inclinometer system utilises modern communication and Smart devices to enable the tilt data generated by the probe to be managed, stored and transferred directly from site via FTP, API, email or other communication platforms.
It is available for vertical, inclined and horizontal applications.
TILT BEAM
In stock
The Tilt Beam is a lightweight, rigid aluminium beam that is used in conjunction with a Triaxial Tilt Node, a NanoPlus or a NanoMacro.
The tilt beam has been successfully used in many applications, including:
- Movement monitoring of any structure
- Longitudinal settlement
- Tunnel convergence/divergence
- Lateral displacements
IN-PLACE INCLINOMETER (IPI)
In stock
HUMIDITY & CORROSION (CorroDec®2G)
In stock
The structural infrastructure must always meet requirements such as performance, stability and durability. These requirements will have a lasting effect on our mobility in the future. The corrosion risk and the corrosion activity of the reinforcing steel largely define these requirements and are determined by various impact and material parameters.
INCLINOMETER SPIRAL SENSOR
In stock
Reviews
There are no reviews yet.