VW JOINT METER
The instrument consists of two parts, a socket and the main body with a waterproof vibrating wire sensing gauge.
During construction of the structure, the socket is secured to the form and embedded into a lift of the block to be constructed. After removal of the form, and prior to concreting of adjacent block, the gauge is screwed into the socket, set at the desired range and then embedded into concrete.
Opening and closing of joint is then measured by the gauge, which is firmly anchored in both blocks. The instrument body includes universal joints, on which sensing element is mounted, accommodating a small degree of shear movement that might occur.
The vibrating wire joint meter is a robust and accurate instrument with excellent long-term stability. It can be measured by vibrating wire portable readout units or a data logger if remote continuous monitoring of the joints is required. All measurements are compared to an initial datum reading, providing a history of magnitude and rate of movement at the joint.
| Brands | Geosense |
|---|---|
| Ranges | 15, 25, 50 mm (other ranges available) |
| Over range | 1.25 x range |
| Resolution | 0.025% FS |
| Accuracy | 0.2% F.S. (0.1% FS optional) |
| Operating temp. | -20 to +80°C |
| Length x diameter | 340mm or 430mm x 51mm |
Related products
VW PIEZOMETER VWP-3000 SERIES
In stock
IPX IN-PLACE EXTENSOMETER
In stock
The In-Place Extensometer (IPX) offers automated monitoring of standard magnetic extensometer installations. The system is designed for a simple, adaptable installation with a single cable connection at the top of the borehole. Its large measurement range accommodates large levels of settlement or heave, and ease of adjustment means it can be reconfigured for changed site conditions such as embankment filling or cutting.
TRIAXIAL TILT SENSOR NODE
In stock
SUBMERSIBLE TILT METER
In stock
TILT BEAM MEMS
In stock
MEMS Tilt Beams are designed for attachment to structures, on either a vertical or horizontal surface, for the measurement of tilt or differential settlement.
They consist of a highly accurate MEMS sensor housed in a fully sealed enclosure which is mounted on a lightweight rigid GRP beam. This can be mounted onto the structure using special anchors. The GRP beam has a very low coefficient of thermal expansion meaning that thermal affects are minimised.
PENDULUM SYSTEM
In stock
HPS-3500 (Hanging) and IPS-3000 (Inverted) Pendulums are used to measure the tilt or rotation by measuring the relative internal horizontal displacement of points along a true vertical line. Each has a tensioned, stainless steel wire and the effects of the earth gravitational forces to guarantee a perfectly vertical line between a fixed point and a tensioning mechanism. Typical applications include concrete dams, bridges and high rise buildings.
INCLINOMETER SPIRAL SENSOR
In stock
MAGNETIC EXTENSOMETER GXM RANGE
In stock
The GEO-XM settlement system is a magnet extensometer system used typically to monitor settlement and heave in foundations, excavations and embankments.
Data received identifies the depth and position where settlement has occurred as well as the total amount of settlement.
It can also be installed behind retaining structures, such as sheet piles and slurry walls, and above underground openings, such as tunnels and shafts.

Reviews
There are no reviews yet.