![rain[e]LP](https://terrasense.ae/wp-content/uploads/2023/11/raine-300x300.jpg)
STRAIN GAUGE LOAD CELL SGLC-7050
The SGLC 7050 series load cell consists of a solid cylinder of high strength stainless steel with a series of electrical resistance strain gauges connected around the periphery as a Wheatstone Bridge that compensates for unevenly distributed loads and provides a single mV/V signal output.
Description
It is most commonly used to measure load acting on piles, struts, arch supports and props.It is most commonly used to measure load acting on piles, struts, arch supports and props.
When the load cell is subjected to load the resistance of the strain gauges will change and the output signal is directly proportional to the applied load. Mounting surfaces should be flat and parallel for optimum performance and the use of loading cap for strut monitoring is recommended.
Connection to the load cell is via a heavy-duty multi-core sheathed cable which can be connected to a direct portable readout, data logging or Wi-SOS 400 system.
Additional information
| Brands | |
|---|---|
| Range |
1000, 2000, 3000, 5000, 10,000kN |
| Non linearity |
± 1% FS |
| Over range |
150% |
| Excitation |
10V DC |
| Output |
1.5mV/V |
| Bridge resistance |
1400 Ohms |
| Number of sensors |
16 |
| Material |
Stainless steel |
| Temperature range |
-20 to + 70ºC |
Reviews (0)
About brand
Geosense Ltd is one of Europe’s leading manufacturers and suppliers of instruments to the geotechnical, civil engineering, mining and environmental industries.
Geosense products are used globally in major projects in more than 68 countries. With a comprehensive in-house design and manufacturing capability, we can provide products not only to tight deadlines but also to suit custom-engineered solutions for specific project requirements.
Geosense specialises in the manufacture of vibrating wire and MEMS sensors, which are used to produce a wide range of instruments. In addition we manufacture automated data acquisition systems to complement our sensors, including wireless systems.
Data Sheets
Related products
VW PIEZOMETER VWP-3000 SERIES
In stock
IPX IN-PLACE EXTENSOMETER
In stock
The In-Place Extensometer (IPX) offers automated monitoring of standard magnetic extensometer installations. The system is designed for a simple, adaptable installation with a single cable connection at the top of the borehole. Its large measurement range accommodates large levels of settlement or heave, and ease of adjustment means it can be reconfigured for changed site conditions such as embankment filling or cutting.
VWPHT-3600 SERIES
In stock
The VWPHT-3600 series High Temperature Piezometers are suitable for the extreme environments of temperature and pressure found within applications such as geothermal heat and enhanced oil recovery systems including steam assisted gravity drainage (SAGD) and cyclic steam stimulation (CSS). They are capable of monitoring high temperatures up to 250°C and pressures up to 34.5 MPa.
STRAIN GAUGE PIEZOMETER SGP-3400 SERIES
In stock
The SGP-3400 Series of strain gauge piezometers are designed for monitoring soil pore pressure or changes in water level and are also suitable for dynamic monitoring such as pumping tests.
They are accurate, highly-reliable and suitable for use in the harsh environments often found within civil engineering including water wells, boreholes, dams, reservoirs, rivers, tanks or any other body of water.
IN-PLACE INCLINOMETER (IPI)
In stock
DIGITAL PIEZOMETER – dPiezo
In stock
IPI-X IN PLACE INC – EXT
In stock
WATER LEVEL METER
In stock
Reviews
There are no reviews yet.