![rain[e]H3](https://terrasense.ae/wp-content/uploads/2023/11/raineH3-300x300.jpg)
AUTOMATIC PENDULUM READOUT TP-2000 SERIES
The Geosense TP-2000 Series is a readout device specifically designed to automatically measure and record relative movements of normal and inverted pendulums. It is housed in a robust waterproof housing and is simple to install using a special mounting plate.
It can be installed as part of a complete new system or be retro-fitted as part of an upgrade to an existing manual system.
Measurements are obtained using highly sensitive and accurate CCD technology which converts the data with temperature correction into either an analogue or digital signal which can be transmitted to a remote data logger. Data can also be stored and read locally with an additional LED display.
Description
The Geosense TP-2000 Series is available in three models:
- Model Range
- TP-2D-2001 50 x 50mm
- TP-2D-2002 50 x 100mm
- TP-3D-2003 50 x 100 x 50mm
Additional information
| Brands | |
|---|---|
| Standard Ranges |
(X axis) 0 to 50mm; (Y axis) 0 to 50mm, 0 to 100mm; (Z axis) 0 to 50mm |
| Resolution |
0.01mm |
| Accuracy |
± 0.05mm |
| Repeatability |
±0.1mm |
| Communication Method |
4-20mA, RS-485 |
| Display |
4-digit LED |
| Data Storage |
2000 data sets, 1200 data sets |
| Power Supply |
85-265 VAC, 50-60 Hz |
| Operating Temperature |
-15°C to +60 °C |
| Operating Humidity |
100% relative humidity |
| Protection |
IP65 |
Reviews (0)
About brand
Geosense Ltd is one of Europe’s leading manufacturers and suppliers of instruments to the geotechnical, civil engineering, mining and environmental industries.
Geosense products are used globally in major projects in more than 68 countries. With a comprehensive in-house design and manufacturing capability, we can provide products not only to tight deadlines but also to suit custom-engineered solutions for specific project requirements.
Geosense specialises in the manufacture of vibrating wire and MEMS sensors, which are used to produce a wide range of instruments. In addition we manufacture automated data acquisition systems to complement our sensors, including wireless systems.
Data Sheets
Related products
VW PIEZOMETER VWP-3000 SERIES
In stock
NANO TRIAXIAL TILT SENSOR
In stock
The Nano range uses the same core platform as our other tilt sensors, so it can deliver a similar level of performance and reliability, all in a small and robust enclosure. Nanos have been successfully used in many applications, including:
- Tunnel distortion
- Tunnel heave/settlement
- Embankment slippage (used in conjunction with stake mounts)
- Structural movement
- Rail track heave/settlement
- Rail trackbed cant and twist
SUBMERSIBLE TILT METER
In stock
PORTABLE MEMS INCLINOMETER
In stock
The MEMS Portable Inclinometer system utilises modern communication and Smart devices to enable the tilt data generated by the probe to be managed, stored and transferred directly from site via FTP, API, email or other communication platforms.
It is available for vertical, inclined and horizontal applications.
TILT BEAM
In stock
The Tilt Beam is a lightweight, rigid aluminium beam that is used in conjunction with a Triaxial Tilt Node, a NanoPlus or a NanoMacro.
The tilt beam has been successfully used in many applications, including:
- Movement monitoring of any structure
- Longitudinal settlement
- Tunnel convergence/divergence
- Lateral displacements
IN-PLACE INCLINOMETER (IPI)
In stock
TILT BEAM MEMS
In stock
MEMS Tilt Beams are designed for attachment to structures, on either a vertical or horizontal surface, for the measurement of tilt or differential settlement.
They consist of a highly accurate MEMS sensor housed in a fully sealed enclosure which is mounted on a lightweight rigid GRP beam. This can be mounted onto the structure using special anchors. The GRP beam has a very low coefficient of thermal expansion meaning that thermal affects are minimised.
MAGNETIC EXTENSOMETER GXM RANGE
In stock
The GEO-XM settlement system is a magnet extensometer system used typically to monitor settlement and heave in foundations, excavations and embankments.
Data received identifies the depth and position where settlement has occurred as well as the total amount of settlement.
It can also be installed behind retaining structures, such as sheet piles and slurry walls, and above underground openings, such as tunnels and shafts.
Reviews
There are no reviews yet.