MLTDR-W-50S
The MLTDR-W-50 is a datalogger designed to automate monitoring of up to 8 coaxial cables embedded in a slope or borehole for deformation monitoring. It contains a control module, TDR interface and, optionally, an 8 channel coaxial cable multiplexer.
It is equipped with an interface to read Vibrating Wire gages. These gages are typically used to monitor pore pressures along the length of the installed TDR cable. The datalogger provides connection for 2 Vibrating Wire gages, a Canary Systems® MicroMux or MiniMux multiplexer may also be installed to expand the measurement capability to 5 or 17 instruments. A 50AHr lead-acid battery provides power, and is recharged either through a 40W solar panel or an AC power connection.
Communications are possible via a wireless or wired network interface. For wireless networks, a high performance ultra wide band log periodic antenna is supplied, including a lightning surge protector. An SGX 5150 is used for the Wi-Fi network interface.
Description
Time Domain Reflectrometry (TDR) is increasingly being used in geotechnical applications for deformation monitoring in soils and concrete. It provides accurate location information for faults and can provide indication of the static or dynamic nature of the faults. It is typically used to monitor slope movement of embankments including highway cuts, rail beds, bridge abutments and open pit mines.
In TDR applications the signal is an electrical pulse broadcast down a coaxial cable, and changes in the impedance of the cable, either inductive or capacitive, cause reflections to be returned to the signal generator. The resultant reflections are measured and presented as a function of time, the time is translated to distance based on the known propagation velocity of the cable being utilized. In geotechnical applications the cable typically takes the form of a rugged coaxial cable with a diameter of 12mm (0.5”). The cable is usually grouted into a borehole drilled into the embankment to be monitored. Any movement of the embankment will crimp the cable, and the reflections indicate approximate magnitude of the crimp and the location. The resolution is related to the number of samples of data being collected.
Additional information
| Brands |
|---|
Reviews (0)
About brand
Canary develops a web-based software platform that aggregates geotechnical/geomechanical data from numerous sources into a single platform that provides analytics and other tools including automated alarming and reporting. Canary also develops and sells electronic hardware consist of Dataloggers, Data acquisition systems & Multiplexers for a variety of applications related to weather, water, energy, gas flux and turbulence, infrastructure, and soil.
Data Sheets
Related products
VW PIEZOMETER VWP-3000 SERIES
In stock
BOREHOLE ROD EXTENSOMETER
In stock
The Geosense® GEO-XB2 borehole rod type extensometer range is used to measure and locate settlement, displacement and deformation in soil and rock.
It consists of a reference head and one or more in-hole anchors each of which is placed at a known depth and connected to the reference head by either a rigid or flexible rod running inside a flexible sleeve, which keeps the rod de-bonded from the grout.
VWPHT-3600 SERIES
In stock
The VWPHT-3600 series High Temperature Piezometers are suitable for the extreme environments of temperature and pressure found within applications such as geothermal heat and enhanced oil recovery systems including steam assisted gravity drainage (SAGD) and cyclic steam stimulation (CSS). They are capable of monitoring high temperatures up to 250°C and pressures up to 34.5 MPa.
PRESSURE TRANSDUCER VWT-9000 SERIES
In stock
The Geosense® VWT-9000 Series of Pressure Transducers are designed to be connected directly into hydraulic or pneumatic pressure lines by means of a 1/4” BSPF thread. Other thread sizes are available on request.
They are typically used to monitor uplift pressures within dams and to enable manual standpipe piezometers to be upgraded into an automated data acquisition system.
DIGITAL PIEZOMETER – dPiezo
In stock
WATER LEVEL METER
In stock
HUMIDITY & CORROSION (CorroDec®2G)
In stock
The structural infrastructure must always meet requirements such as performance, stability and durability. These requirements will have a lasting effect on our mobility in the future. The corrosion risk and the corrosion activity of the reinforcing steel largely define these requirements and are determined by various impact and material parameters.
INCLINOMETER SPIRAL SENSOR
In stock
Reviews
There are no reviews yet.