DRIVE-IN PIEZOMETERS WP-3400 & SGP-3500 SERIES
Drive-in piezometers, also referred to as push-in piezometers, are designed for installing in soft clays, organic or fine grained cohesionless soils typically with a SPT-N value less than 10. They are available with a CPT fitting or 1” BSP thread.
Depending on the depth and type of soil, they can either be pushed directly into the soil from ground level to the required depth or pushed into the base of a CPT test or drilled borehole.
Installation is carried out by using CPT or conventional drill rods onto which is fitted a special adaptor that fits onto the top of the piezometer allowing it to be pushed to depth and the rods retrieved. Adaptors are available to suit most sizes and thread types of rods used for Cone Penetrometer Testing including R32 and reverse threads.
Alternatively 1” BSP galvanised pipe connected directly onto the top of a piezometer with a 1” BSP thread can be used and is sometimes used as a sacrificial pipe left within the borehole.
| Brands | Geosense |
|---|---|
| Pressure Range | 100 kPa to 3.5 MPa |
| Over Range | 1.5 |
| Accuracy | <0.1% FS |
| Temperature range | -20 to +80°C |
Related products
BOREHOLE ROD EXTENSOMETER
In stock
The Geosense® GEO-XB2 borehole rod type extensometer range is used to measure and locate settlement, displacement and deformation in soil and rock.
It consists of a reference head and one or more in-hole anchors each of which is placed at a known depth and connected to the reference head by either a rigid or flexible rod running inside a flexible sleeve, which keeps the rod de-bonded from the grout.
OPTICAL DISPLACEMENT SENSOR NODE
In stock
IN-PLACE TILT METER MEMS
In stock
IN-PLACE INCLINOMETER (IPI)
In stock
STANDPIPE PIEZOMETER
In stock
HUMIDITY & CORROSION (CorroDec®2G)
In stock
The structural infrastructure must always meet requirements such as performance, stability and durability. These requirements will have a lasting effect on our mobility in the future. The corrosion risk and the corrosion activity of the reinforcing steel largely define these requirements and are determined by various impact and material parameters.
INCLINOMETER SPIRAL SENSOR
In stock
MAGNETIC EXTENSOMETER GXM RANGE
In stock
The GEO-XM settlement system is a magnet extensometer system used typically to monitor settlement and heave in foundations, excavations and embankments.
Data received identifies the depth and position where settlement has occurred as well as the total amount of settlement.
It can also be installed behind retaining structures, such as sheet piles and slurry walls, and above underground openings, such as tunnels and shafts.

Reviews
There are no reviews yet.