New
Digital Interface Node
The Digital Interface Node is a robust IP66/1P67 rated digital data logger that transforms your data collection from manual to automated sampling. This wireless digital data logger is compatible with a large variety of sensors that carry a digital output and enables a simple connection to the Senceive back-end & front-end platforms. Interact and manage your data online and change reporting times and thresholds remotely.
The Digital Interface Node is compatible with InfraGuard™. Choose this responsive reporting option when you need dynamic reporting. This means your sensors can be self-managing tools that react to changing site conditions. Features include accelerated sampling, triggered site photos and escalated alerting, with near real-time notifications.
Description
Features
- Versatile mounting options
- Compatible with FlatMesh™ and GeoWAN™ wireless communications platforms
- Waterproof to IP66 / IP67
- Low power, long battery life with changeable batteries
- Automatic power sharing and switchover between battery and external DC supply
- Firmware is remotely upgradeable over the air via the gateway, reducing costly site visits (FlatMesh™)
- Extremely low noise performance
- NFC compatibility, enabling on the spot adjustments to the node
- “Sleep mode” functionality
- Power sensors requiring up to 20 Watts
- Configurable output voltage enabling longer sensor chains
- Compatible with our InfraGuard™ responsive reporting option for networked and dynamic reporting (FlatMesh™)
- Hardware support for these connection protocols: RS232, RS422, RS485, SDI-12, MODBUS and CAN
The Digital Interface Node is compatible with a wide variety of digital structural, environmental, and geotechnical sensors including:
- Inclinometers
- Extensometers
- Piezometers
- Load/Pressure Cells
- Hydrostatic Pressure cells
- Temperature
- Wind Velocity
- Vibration
- Water Level
- Hydrostatic Level Cells
- Stress/Strain
- Crack Movement
Additional information
| Brands | |
|---|---|
| Digital Interfaces |
RS232 |
| Output Voltage (DC) |
0.8 V to 22 V |
| Output Current |
Up to 2A |
Reviews (0)
About brand
Since 2005, Senceive has been singularly focused on bringing intelligent wireless condition monitoring to civil engineering and rail applications. Senceive is widely seen as the global leader for wireless remote condition monitoring solutions, with more than 30,000 sensors installed in 2020 alone.
Related products
VW PIEZOMETER VWP-3000 SERIES
In stock
BOREHOLE ROD EXTENSOMETER
In stock
The Geosense® GEO-XB2 borehole rod type extensometer range is used to measure and locate settlement, displacement and deformation in soil and rock.
It consists of a reference head and one or more in-hole anchors each of which is placed at a known depth and connected to the reference head by either a rigid or flexible rod running inside a flexible sleeve, which keeps the rod de-bonded from the grout.
VWPHT-3600 SERIES
In stock
The VWPHT-3600 series High Temperature Piezometers are suitable for the extreme environments of temperature and pressure found within applications such as geothermal heat and enhanced oil recovery systems including steam assisted gravity drainage (SAGD) and cyclic steam stimulation (CSS). They are capable of monitoring high temperatures up to 250°C and pressures up to 34.5 MPa.
DRIVE-IN PIEZOMETERS WP-3400 & SGP-3500 SERIES
In stock
Drive-in piezometers, also referred to as push-in piezometers, are designed for installing in soft clays, organic or fine grained cohesionless soils typically with a SPT-N value less than 10. They are available with a CPT fitting or 1” BSP thread.
Depending on the depth and type of soil, they can either be pushed directly into the soil from ground level to the required depth or pushed into the base of a CPT test or drilled borehole.
PRESSURE TRANSDUCER VWT-9000 SERIES
In stock
The Geosense® VWT-9000 Series of Pressure Transducers are designed to be connected directly into hydraulic or pneumatic pressure lines by means of a 1/4” BSPF thread. Other thread sizes are available on request.
They are typically used to monitor uplift pressures within dams and to enable manual standpipe piezometers to be upgraded into an automated data acquisition system.
PORTABLE MEMS INCLINOMETER
In stock
The MEMS Portable Inclinometer system utilises modern communication and Smart devices to enable the tilt data generated by the probe to be managed, stored and transferred directly from site via FTP, API, email or other communication platforms.
It is available for vertical, inclined and horizontal applications.
INCLINOMETER CASING XC
In stock
INCLINOMETER SPIRAL SENSOR
In stock
Reviews
There are no reviews yet.