FlatMesh 3G Gateway
The FlatMesh 3G Gateway is a fully integrated unit which provides all the functionality required to operate a FlatMesh network in a remote location.
No fixed IP address is required for the cellular service; the Gateway simply initiates the connection with Senceive WebMonitor software over the internet.
Description
Features
- Integrated Five Band UMTS/HSPA+ and Quad Band GSM/GPRS/EDGE Modem
- Integrated solar charging circuit connected to internal lithium-ion rechargeable battery pack (no external battery pack)
- Fully operational, including FlatMesh and cellular radios, for three weeks (typical) on internal battery
- On-board industrial-grade flash memory card for data buffering and backup
- Incorporates bracket for mounting to pole or wall
- Waterproof connection to solar panel or other DC power supply
- All components waterproof to IP67
- Firmware is remotely upgradeable over the air reducing costly site visits
- Extended temperature range battery option available for extreme conditions
- Micro-USB connector for maintenance and local data access
Additional information
| Brands | |
|---|---|
| Housing Material |
Die cast aluminium body |
| International Protection Marking |
IP67 |
| Mounting Options |
Combination wall / pole mount bracket included |
Reviews (0)
About brand
Since 2005, Senceive has been singularly focused on bringing intelligent wireless condition monitoring to civil engineering and rail applications. Senceive is widely seen as the global leader for wireless remote condition monitoring solutions, with more than 30,000 sensors installed in 2020 alone.
Data Sheets
Related products
VWPHT-3600 SERIES
In stock
The VWPHT-3600 series High Temperature Piezometers are suitable for the extreme environments of temperature and pressure found within applications such as geothermal heat and enhanced oil recovery systems including steam assisted gravity drainage (SAGD) and cyclic steam stimulation (CSS). They are capable of monitoring high temperatures up to 250°C and pressures up to 34.5 MPa.
NANO TRIAXIAL TILT SENSOR
In stock
The Nano range uses the same core platform as our other tilt sensors, so it can deliver a similar level of performance and reliability, all in a small and robust enclosure. Nanos have been successfully used in many applications, including:
- Tunnel distortion
- Tunnel heave/settlement
- Embankment slippage (used in conjunction with stake mounts)
- Structural movement
- Rail track heave/settlement
- Rail trackbed cant and twist
SUBMERSIBLE TILT METER
In stock
PORTABLE MEMS INCLINOMETER
In stock
The MEMS Portable Inclinometer system utilises modern communication and Smart devices to enable the tilt data generated by the probe to be managed, stored and transferred directly from site via FTP, API, email or other communication platforms.
It is available for vertical, inclined and horizontal applications.
IN-PLACE INCLINOMETER (IPI)
In stock
IPI-X IN PLACE INC – EXT
In stock
PENDULUM SYSTEM
In stock
HPS-3500 (Hanging) and IPS-3000 (Inverted) Pendulums are used to measure the tilt or rotation by measuring the relative internal horizontal displacement of points along a true vertical line. Each has a tensioned, stainless steel wire and the effects of the earth gravitational forces to guarantee a perfectly vertical line between a fixed point and a tensioning mechanism. Typical applications include concrete dams, bridges and high rise buildings.
MAGNETIC EXTENSOMETER GXM RANGE
In stock
The GEO-XM settlement system is a magnet extensometer system used typically to monitor settlement and heave in foundations, excavations and embankments.
Data received identifies the depth and position where settlement has occurred as well as the total amount of settlement.
It can also be installed behind retaining structures, such as sheet piles and slurry walls, and above underground openings, such as tunnels and shafts.
Reviews
There are no reviews yet.