IN-PLACE TILT METER MEMS
The MEMS In-Place Tilt Meter measures uniaxial or biaxial tilt, which is measured from the plane(s) perpendicular to the base.
It is designed to be installed in either the vertical or horizontal position by either bonding, bolting or strong magnetic fixing directly to a structure or mounting plate
Description
The tilt sensors, based on well-established MEMS technology, are mounted within a rugged, heavy-duty waterproof die-cast metal enclosure suitable for the harsh environments found within construction and building industries.
Thermal effects of the MEMS sensor is minimal but in order to compensate for the effects of temperature on the enclosure, mountings and structure, the unit is fitted with an integral thermistor.
The digital RS-485 output signal provides the ultimate in accuracy together with the advantage of being able to create a digital BUS system where all sensors can be linked together and cable qantities significantly reduced.
Each unit is individually calibrated to provide the ultimate in system accuracy and repeatability.
Additional information
Reviews (0)
About brand
Data Sheets
Related products
VW PIEZOMETER VWP-3000 SERIES
In stock
BOREHOLE ROD EXTENSOMETER
In stock
The Geosense® GEO-XB2 borehole rod type extensometer range is used to measure and locate settlement, displacement and deformation in soil and rock.
It consists of a reference head and one or more in-hole anchors each of which is placed at a known depth and connected to the reference head by either a rigid or flexible rod running inside a flexible sleeve, which keeps the rod de-bonded from the grout.
PRESSURE TRANSDUCER VWT-9000 SERIES
In stock
The Geosense® VWT-9000 Series of Pressure Transducers are designed to be connected directly into hydraulic or pneumatic pressure lines by means of a 1/4” BSPF thread. Other thread sizes are available on request.
They are typically used to monitor uplift pressures within dams and to enable manual standpipe piezometers to be upgraded into an automated data acquisition system.
DIGITAL PIEZOMETER – dPiezo
In stock
TILT BEAM MEMS
In stock
MEMS Tilt Beams are designed for attachment to structures, on either a vertical or horizontal surface, for the measurement of tilt or differential settlement.
They consist of a highly accurate MEMS sensor housed in a fully sealed enclosure which is mounted on a lightweight rigid GRP beam. This can be mounted onto the structure using special anchors. The GRP beam has a very low coefficient of thermal expansion meaning that thermal affects are minimised.
IMAGING & CAMERA
In stock
The FlatMesh 4G Camera is a best in class solar powered solution for static imagery in remote or industrial areas.
It contains a monochrome digital camera which can take clear, high quality photographs day or night without the use of external illuminators.
The 4G camera connects to a Senceive EdgeHub (with FlatMesh) unit which provides power and connectivity over the cellular network (2G/3G/4G) or existing wired ethernet networks.
INCLINOMETER CASING XC
In stock
MAGNETIC EXTENSOMETER GXM RANGE
In stock
The GEO-XM settlement system is a magnet extensometer system used typically to monitor settlement and heave in foundations, excavations and embankments.
Data received identifies the depth and position where settlement has occurred as well as the total amount of settlement.
It can also be installed behind retaining structures, such as sheet piles and slurry walls, and above underground openings, such as tunnels and shafts.
Reviews
There are no reviews yet.