PRESSURE TRANSDUCER VWT-9000 SERIES
The Geosense® VWT-9000 Series of Pressure Transducers are designed to be connected directly into hydraulic or pneumatic pressure lines by means of a 1/4” BSPF thread. Other thread sizes are available on request.
They are typically used to monitor uplift pressures within dams and to enable manual standpipe piezometers to be upgraded into an automated data acquisition system.
Categories: Geo-Structural Instruments, Piezometers
Description
They are accurate, highly-reliable and suitable for use in the harsh environments often found within civil engineering including water wells, boreholes, dams, reservoirs, rivers, tanks or any other body of water.
Vibrating Wire technology is a well-proven method of converting fluid pressures on a sensitive diaphragm into a frequency signal which is capable of long transmission distances without degradation, tolerant of wet wiring conditions and resistant to external electrical noise.
Additional information
| Brands | |
|---|---|
| Pressure range (VWT-9000; Standard 1/4” BSPF) |
345, 518, 690 kPa 1, 2, 3.5, 5, 7 10, 20 MP |
| Pressure range (VWT-9200; Low Pressure 1/4” BSPF) |
70, 173 kPa |
| Material |
316 Stainless Steel |
| Operating Temperature Range |
0 to +70°C |
| Over Voltage Protection |
90V Gas Plasma Arrester |
| Thermistor |
3k Ohms @ 25°C |
| Frequency Range |
1850-3500 Hz |
Reviews (0)
Be the first to review “PRESSURE TRANSDUCER VWT-9000 SERIES” Cancel reply
About brand
Geosense Ltd is one of Europe’s leading manufacturers and suppliers of instruments to the geotechnical, civil engineering, mining and environmental industries.
Geosense products are used globally in major projects in more than 68 countries. With a comprehensive in-house design and manufacturing capability, we can provide products not only to tight deadlines but also to suit custom-engineered solutions for specific project requirements.
Geosense specialises in the manufacture of vibrating wire and MEMS sensors, which are used to produce a wide range of instruments. In addition we manufacture automated data acquisition systems to complement our sensors, including wireless systems.
Data Sheets
Related products
IPX IN-PLACE EXTENSOMETER
In stock
Rated 0 out of 5
The In-Place Extensometer (IPX) offers automated monitoring of standard magnetic extensometer installations. The system is designed for a simple, adaptable installation with a single cable connection at the top of the borehole. Its large measurement range accommodates large levels of settlement or heave, and ease of adjustment means it can be reconfigured for changed site conditions such as embankment filling or cutting.
VWPHT-3600 SERIES
In stock
Rated 0 out of 5
The VWPHT-3600 series High Temperature Piezometers are suitable for the extreme environments of temperature and pressure found within applications such as geothermal heat and enhanced oil recovery systems including steam assisted gravity drainage (SAGD) and cyclic steam stimulation (CSS). They are capable of monitoring high temperatures up to 250°C and pressures up to 34.5 MPa.
STRAIN GAUGE PIEZOMETER SGP-3400 SERIES
In stock
Rated 0 out of 5
The SGP-3400 Series of strain gauge piezometers are designed for monitoring soil pore pressure or changes in water level and are also suitable for dynamic monitoring such as pumping tests.
They are accurate, highly-reliable and suitable for use in the harsh environments often found within civil engineering including water wells, boreholes, dams, reservoirs, rivers, tanks or any other body of water.
TRIAXIAL TILT SENSOR NODE
In stock
Rated 0 out of 5
IN-PLACE TILT METER MEMS
In stock
Rated 0 out of 5
PORTABLE MEMS INCLINOMETER
In stock
Rated 0 out of 5
The MEMS Portable Inclinometer system utilises modern communication and Smart devices to enable the tilt data generated by the probe to be managed, stored and transferred directly from site via FTP, API, email or other communication platforms.
It is available for vertical, inclined and horizontal applications.
TILT BEAM
In stock
Rated 0 out of 5
The Tilt Beam is a lightweight, rigid aluminium beam that is used in conjunction with a Triaxial Tilt Node, a NanoPlus or a NanoMacro.
The tilt beam has been successfully used in many applications, including:
- Movement monitoring of any structure
- Longitudinal settlement
- Tunnel convergence/divergence
- Lateral displacements
IPI-X IN PLACE INC – EXT
In stock
Rated 0 out of 5

Reviews
There are no reviews yet.