VW 3D CRACK METER VWTCM-4600
VWTCM-4600 3D crack meters monitor three-way displacement across cracks and joints in concrete, rock, soil and structures.
The central reference block allows the vibrating wire transducers to show independent movement in all directions, irrespective of each other.
The VWTCM-4600 comprises a 3D mounting frame comprising two arms and two groutable anchors and three vibrating wire displacement transducers complete with built-in thermistors.
Groutable anchors are installed either side of a joint or crack; the installation jig provided ensures that the two anchors are positioned correctly. Once they are set in position the installation jig is removed and the the VWDT-6000 transducers installed. They are positioned against the reference block and typically set to their mid-point.
Any movement in the monitored position will result in relative change between the two anchors which will cause one or more of the VW transducer rods to move independently, thus changing the frequency of the wire. This change in frequency is converted to show the movement in millimetres.
Typically, signal cables run from the sensors to a data logger for remote reading. Alternatively, a terminal/junction box is used and a handheld readout or data logger is used to record the readings manually.
An initial datum reading is taken, which is then compared to all subsequent readings to give the change and magnitude of displacement.
| Brands | Geosense |
|---|---|
| Ranges | 12.5, 25 mm |
| Resolution | <0.025% FS |
| Accuracy | ± 0.1% FS |
| Non linearity | <0.5% FS |
| Operating temperature | -20 to +70 °C |
Related products
VW PIEZOMETER VWP-3000 SERIES
In stock
IN-PLACE TILT METER MEMS
In stock
SUBMERSIBLE TILT METER
In stock
TILT BEAM
In stock
The Tilt Beam is a lightweight, rigid aluminium beam that is used in conjunction with a Triaxial Tilt Node, a NanoPlus or a NanoMacro.
The tilt beam has been successfully used in many applications, including:
- Movement monitoring of any structure
- Longitudinal settlement
- Tunnel convergence/divergence
- Lateral displacements
INCLINOMETER CASING QJ
In stock
HUMIDITY & CORROSION (CorroDec®2G)
In stock
The structural infrastructure must always meet requirements such as performance, stability and durability. These requirements will have a lasting effect on our mobility in the future. The corrosion risk and the corrosion activity of the reinforcing steel largely define these requirements and are determined by various impact and material parameters.
INCLINOMETER CASING XC
In stock
MAGNETIC EXTENSOMETER GXM RANGE
In stock
The GEO-XM settlement system is a magnet extensometer system used typically to monitor settlement and heave in foundations, excavations and embankments.
Data received identifies the depth and position where settlement has occurred as well as the total amount of settlement.
It can also be installed behind retaining structures, such as sheet piles and slurry walls, and above underground openings, such as tunnels and shafts.
Reviews
There are no reviews yet.