PT100
The Pt100 temperature sensor contains a platinum resistance thermometer that changes resistance value as its temperature changes and provides accurate and reliable long-term temperature measurements. These sensors are often used in the extremely harsh environments found within Geotechnical monitoring.
Description
The platinum element is housed inside a rugged enclosure and sealed with a special sealing material to ensure efficient thermal distribution and has IP68 waterproofing.
The principle of operation is to measure the resistance of a platinum element and in accordance with EN/IEC 60751:2022.
Additional information
| Brands | |
|---|---|
| Temperature range |
-20 to +80 ºC |
| Temperature coefficient of resistance (TCR) |
0.00385 O/O/°C, 0 – 100°C |
| Accuracy |
±0.15°C at 0°C, ±0.35°C at 100°C |
| Resolution |
0.1 ºC |
| Housing |
Stainless steel |
| Housing diameter |
16mm |
| Housing length |
65mm |
| Cable diameter |
5 mm |
Reviews (0)
About brand
Geosense Ltd is one of Europe’s leading manufacturers and suppliers of instruments to the geotechnical, civil engineering, mining and environmental industries.
Geosense products are used globally in major projects in more than 68 countries. With a comprehensive in-house design and manufacturing capability, we can provide products not only to tight deadlines but also to suit custom-engineered solutions for specific project requirements.
Geosense specialises in the manufacture of vibrating wire and MEMS sensors, which are used to produce a wide range of instruments. In addition we manufacture automated data acquisition systems to complement our sensors, including wireless systems.
Data Sheets
Related products
VW PIEZOMETER VWP-3000 SERIES
In stock
MULTI-POINT VW PIEZOMETER
In stock
VWPHT-3600 SERIES
In stock
The VWPHT-3600 series High Temperature Piezometers are suitable for the extreme environments of temperature and pressure found within applications such as geothermal heat and enhanced oil recovery systems including steam assisted gravity drainage (SAGD) and cyclic steam stimulation (CSS). They are capable of monitoring high temperatures up to 250°C and pressures up to 34.5 MPa.
DRIVE-IN PIEZOMETERS WP-3400 & SGP-3500 SERIES
In stock
Drive-in piezometers, also referred to as push-in piezometers, are designed for installing in soft clays, organic or fine grained cohesionless soils typically with a SPT-N value less than 10. They are available with a CPT fitting or 1” BSP thread.
Depending on the depth and type of soil, they can either be pushed directly into the soil from ground level to the required depth or pushed into the base of a CPT test or drilled borehole.
IN-PLACE TILT METER MEMS
In stock
IN-PLACE INCLINOMETER (IPI)
In stock
DIGITAL PIEZOMETER – dPiezo
In stock
INCLINOMETER CASING XC
In stock
Reviews
There are no reviews yet.