Show 12

VW PIEZOMETER VWP-3000 SERIES

In stock

The VWP-3000 Series of Vibrating Wire piezometers use the well-proven method of converting fluid pressures on a sensitive diaphragm into a frequency signal.
FEATURES
  • Reliable long-term performance
  • Rugged, suitable for demanding environments
  • High accuracy
  • Insensitive to long cable lengths

MULTI-POINT VW PIEZOMETER

In stock

Fully grouted installation permits multiple piezometers to be simply and reliably installed in a single borehole. The piezometer string and grout pipe are placed in the borehole and cement-bentonite grout is pumped until the borehole is filled.

VWPHT-3600 SERIES

In stock

The VWPHT-3600 series High Temperature Piezometers are suitable for the extreme environments of temperature and pressure found within applications such as geothermal heat and enhanced oil recovery systems including steam assisted gravity drainage (SAGD) and cyclic steam stimulation (CSS). They are capable of monitoring high temperatures up to 250°C and pressures up to 34.5 MPa.

STRAIN GAUGE PIEZOMETER SGP-3400 SERIES

In stock

The SGP-3400 Series of strain gauge piezometers are designed for monitoring soil pore pressure or changes in water level and are also suitable for dynamic monitoring such as pumping tests. They are accurate, highly-reliable and suitable for use in the harsh environments often found within civil engineering including water wells, boreholes, dams, reservoirs, rivers, tanks or any other body of water.

DRIVE-IN PIEZOMETERS WP-3400 & SGP-3500 SERIES

In stock

Drive-in piezometers, also referred to as push-in piezometers, are designed for installing in soft clays, organic or fine grained cohesionless soils typically with a SPT-N value less than 10. They are available with a CPT fitting or 1” BSP thread. Depending on the depth and type of soil, they can either be pushed directly into the soil from ground level to the required depth or pushed into the base of a CPT test or drilled borehole.

PRESSURE TRANSDUCER VWT-9000 SERIES

In stock

The Geosense® VWT-9000 Series of Pressure Transducers are designed to be connected directly into hydraulic or pneumatic pressure lines by means of a 1/4” BSPF thread. Other thread sizes are available on request. They are typically used to monitor uplift pressures within dams and to enable manual standpipe piezometers to be upgraded into an automated data acquisition system.

DIGITAL PIEZOMETER – dPiezo

In stock

YieldPoint’s d-Piezo digital piezometer integrates a MEMS transducer with a micro-controller to provide a robust digital solution for water pressure and depth monitoring.

STANDPIPE PIEZOMETER

In stock

Simple and economic measurement of groundwater pressures in soil and rock can be carried out using Casagrande type (standpipe) piezometers.

WATER LEVEL METER

In stock

A Water Level Meter is used to determine the water level within a borehole, piezometer pipe or sump. It consists of a stainless steel shrouded probe with a specially designed conductive probe to minimise displacement errors, providing unparalleled accuracy particularly in small bore piezometers.

For the measurement of pore water pressure & water levels.