GEOLOGGER LINX SERIES
The GeoLogger Linx™ is a range of low-cost battery powered data loggers for stand-alone monitoring which can be used with all types of vibrating wire sensors such as piezometers, load cells, crack meters, joint meters, strain gauges, pressure cells, weir monitors and extensometers, together with their associated thermistors.
The large 8MB internal memory enables the storage of up to 270,000 readings. As the internal memory operates as a USB mass storage device, the data is accessible through a mini USB interface allowing data to be easily transferred to a laptop device in the field in csv format.
Description
Supplied with free LINX software, configuration for sensors and logger parameters, such as date, time, and sweep frequency range, is quick and easy. Automatic uploading of calibration factors can also be done using a simple text file provided at the time of supply.
Housed in a rugged polycarbonate waterproof IP66 enclosure, GeoLogger Linx™ loggers are suitable for the harsh environment typically found within civil and structural engineering applications.
Additional information
| Brands | |
|---|---|
| Channels |
1 VW + 1 NTC; 4 VW + 4 NTC; 8 VW + 8 NTC |
| Excitation |
0 – 5 V |
| Range |
260 to 4800 Hz |
| Accuracy |
0.01% Full Scale |
| Thermistor Range |
1000 to 64000 Ohm |
| Resolution |
<4 ohm |
| Accuracy (25 ºC) (sensor & temperature dependent) |
0.3 ºC |
| Communication Port |
Mini B USB |
| Readout |
Windows XP onwards |
| Memory |
8MB |
| Readings (1, 4 & 8 Channels) |
up to 279,000, up to 135,000, up to 83,000 |
| Voltage |
3-7Vdc |
| Enclosure Rating |
IP66 |
Reviews (0)
About brand
Geosense Ltd is one of Europe’s leading manufacturers and suppliers of instruments to the geotechnical, civil engineering, mining and environmental industries.
Geosense products are used globally in major projects in more than 68 countries. With a comprehensive in-house design and manufacturing capability, we can provide products not only to tight deadlines but also to suit custom-engineered solutions for specific project requirements.
Geosense specialises in the manufacture of vibrating wire and MEMS sensors, which are used to produce a wide range of instruments. In addition we manufacture automated data acquisition systems to complement our sensors, including wireless systems.
Data Sheets
Related products
VW PIEZOMETER VWP-3000 SERIES
In stock
BOREHOLE ROD EXTENSOMETER
In stock
The Geosense® GEO-XB2 borehole rod type extensometer range is used to measure and locate settlement, displacement and deformation in soil and rock.
It consists of a reference head and one or more in-hole anchors each of which is placed at a known depth and connected to the reference head by either a rigid or flexible rod running inside a flexible sleeve, which keeps the rod de-bonded from the grout.
VWPHT-3600 SERIES
In stock
The VWPHT-3600 series High Temperature Piezometers are suitable for the extreme environments of temperature and pressure found within applications such as geothermal heat and enhanced oil recovery systems including steam assisted gravity drainage (SAGD) and cyclic steam stimulation (CSS). They are capable of monitoring high temperatures up to 250°C and pressures up to 34.5 MPa.
DRIVE-IN PIEZOMETERS WP-3400 & SGP-3500 SERIES
In stock
Drive-in piezometers, also referred to as push-in piezometers, are designed for installing in soft clays, organic or fine grained cohesionless soils typically with a SPT-N value less than 10. They are available with a CPT fitting or 1” BSP thread.
Depending on the depth and type of soil, they can either be pushed directly into the soil from ground level to the required depth or pushed into the base of a CPT test or drilled borehole.
PRESSURE TRANSDUCER VWT-9000 SERIES
In stock
The Geosense® VWT-9000 Series of Pressure Transducers are designed to be connected directly into hydraulic or pneumatic pressure lines by means of a 1/4” BSPF thread. Other thread sizes are available on request.
They are typically used to monitor uplift pressures within dams and to enable manual standpipe piezometers to be upgraded into an automated data acquisition system.
NANO TRIAXIAL TILT SENSOR
In stock
The Nano range uses the same core platform as our other tilt sensors, so it can deliver a similar level of performance and reliability, all in a small and robust enclosure. Nanos have been successfully used in many applications, including:
- Tunnel distortion
- Tunnel heave/settlement
- Embankment slippage (used in conjunction with stake mounts)
- Structural movement
- Rail track heave/settlement
- Rail trackbed cant and twist
INCLINOMETER CASING XC
In stock
MAGNETIC EXTENSOMETER GXM RANGE
In stock
The GEO-XM settlement system is a magnet extensometer system used typically to monitor settlement and heave in foundations, excavations and embankments.
Data received identifies the depth and position where settlement has occurred as well as the total amount of settlement.
It can also be installed behind retaining structures, such as sheet piles and slurry walls, and above underground openings, such as tunnels and shafts.
Reviews
There are no reviews yet.