d-TILT
The d-Tilt is a full 360 arcdeg triaxial wireless tiltmeter for very precise measurement (0.001 arcdeg resolution) of changes in inclination. The instrument uses a very low noise MEMS accelerometer that enables a resolution of 0.001 arcdeg with a 24hr stability of +/-0.001 arcdeg.
Description
The d-Tilt features full (360 arcdeg) triaxial measurement so that placement on structures can be does not require precise leveling. The d-Tilt can be attached to a beam or mounted directly to any structure. The d-Tilt is also available in borehole model (shown) with a 38mm OD.
The d-Tilt can has an internal logging capability that can store 30,000 readings. The results are downloaded over Bluetooth 5 to an android device. The reading interval and clock synchronization are also handled via Bluetooth 5.
Features:
- Full 360 arcdeg triaxial
- 0.001 arcdeg resolution with +/-0.001 stability (24hr test)
- Output directly in arcdeg
- Available with 5 year power supply (1 reading/hr) or 2 year (1 reading/min)
- Unique instrument ID
- On-board digital temperature sensor for accurate compensation
- High survivability following blasts and vibration
- Easy to install, no pre-leveling required
- Available with wired option
- Available in borehole form factor
- 30,000 readings stored, download by Bluetooth 5
- Bluetooth 5 wireless communication
- Free Android App for data aggregation
Additional information
| Brands | |
|---|---|
| Range |
360 arcdegree triaxial |
| Resolution |
0.001 arcdeg |
| Repeatability |
+/-0.003 arcdeg |
| Non-linearity |
+/-0.006 arcdeg |
Reviews (0)
About brand
Yieldpoint is a leader in the design, manufacture and support of geotechnical monitoring solutions with the highest quality and reliability and at the best possible price for civil and mining.
Data Sheets
Related products
MULTI-POINT VW PIEZOMETER
In stock
PRESSURE TRANSDUCER VWT-9000 SERIES
In stock
The Geosense® VWT-9000 Series of Pressure Transducers are designed to be connected directly into hydraulic or pneumatic pressure lines by means of a 1/4” BSPF thread. Other thread sizes are available on request.
They are typically used to monitor uplift pressures within dams and to enable manual standpipe piezometers to be upgraded into an automated data acquisition system.
TILT BEAM
In stock
The Tilt Beam is a lightweight, rigid aluminium beam that is used in conjunction with a Triaxial Tilt Node, a NanoPlus or a NanoMacro.
The tilt beam has been successfully used in many applications, including:
- Movement monitoring of any structure
- Longitudinal settlement
- Tunnel convergence/divergence
- Lateral displacements
DIGITAL PIEZOMETER – dPiezo
In stock
STANDPIPE PIEZOMETER
In stock
IPI-X IN PLACE INC – EXT
In stock
PENDULUM SYSTEM
In stock
HPS-3500 (Hanging) and IPS-3000 (Inverted) Pendulums are used to measure the tilt or rotation by measuring the relative internal horizontal displacement of points along a true vertical line. Each has a tensioned, stainless steel wire and the effects of the earth gravitational forces to guarantee a perfectly vertical line between a fixed point and a tensioning mechanism. Typical applications include concrete dams, bridges and high rise buildings.
IMAGING & CAMERA
In stock
The FlatMesh 4G Camera is a best in class solar powered solution for static imagery in remote or industrial areas.
It contains a monochrome digital camera which can take clear, high quality photographs day or night without the use of external illuminators.
The 4G camera connects to a Senceive EdgeHub (with FlatMesh) unit which provides power and connectivity over the cellular network (2G/3G/4G) or existing wired ethernet networks.
Reviews
There are no reviews yet.