![rain[e]](https://terrasense.ae/wp-content/uploads/2023/11/raine-300x300.jpg)
Vibrating Wire Sensor Node
Our vibrating wire sensor interface enables high precision and low power monitoring of a wide range of structural and geotechnical sensors for use in variety of sectors.
The Vibrating Wire Sensor interface range brings a wide variety of vibrating wire sensors into our systems. It is a highly integrated system which is capable of exciting and sampling vibrating wire sensors and reporting measurements through Senceive’s wireless communications network to a gateway.
Examples of the sensors supported:
- Piezometers
- Strain gauges
- Load & pressure cells
- In place inclinometers
- External temperature
- Extensometers
- Crack gauges
- Soil moisture sensors
Description
Features
- High performance, easy to connect multichannel connectors
- Waterproof, robust connectors for simple installation
- Resolution of 0.001 Hz and repeatability of ±0.02 Hz
- Integrated long life battery
- 10-15 years’ battery life, including when acting as a relay node within the mesh communications network
- Integrated temperature sensor
- Versatile mounting options
- Waterproof to IP66 / IP67 / IP68
- Firmware is remotely upgradeable over the air via the gateway reducing costly site visits (FlatMesh)
- Supports one NTC sensor on each connector
- 1 and 4 channel versions available
Additional information
| Brands | |
|---|---|
| Frequency Resolution |
0.001 Hz |
| Frequency Repeatability |
±0.02 Hz |
| Frequency Range |
200-6500Hz |
| Stimulus Type |
Swept Sine Wave, typ. 6V peak to peak |
| Thermistor Type |
3kΩ NTC |
| Temperature Resolution |
0.05 |
| Temperature Accuracy |
±0.1°C |
| Temperature Range |
-40°C to +85°C |
Reviews (0)
About brand
Since 2005, Senceive has been singularly focused on bringing intelligent wireless condition monitoring to civil engineering and rail applications. Senceive is widely seen as the global leader for wireless remote condition monitoring solutions, with more than 30,000 sensors installed in 2020 alone.
Related products
VW PIEZOMETER VWP-3000 SERIES
In stock
BOREHOLE ROD EXTENSOMETER
In stock
The Geosense® GEO-XB2 borehole rod type extensometer range is used to measure and locate settlement, displacement and deformation in soil and rock.
It consists of a reference head and one or more in-hole anchors each of which is placed at a known depth and connected to the reference head by either a rigid or flexible rod running inside a flexible sleeve, which keeps the rod de-bonded from the grout.
VWPHT-3600 SERIES
In stock
The VWPHT-3600 series High Temperature Piezometers are suitable for the extreme environments of temperature and pressure found within applications such as geothermal heat and enhanced oil recovery systems including steam assisted gravity drainage (SAGD) and cyclic steam stimulation (CSS). They are capable of monitoring high temperatures up to 250°C and pressures up to 34.5 MPa.
DRIVE-IN PIEZOMETERS WP-3400 & SGP-3500 SERIES
In stock
Drive-in piezometers, also referred to as push-in piezometers, are designed for installing in soft clays, organic or fine grained cohesionless soils typically with a SPT-N value less than 10. They are available with a CPT fitting or 1” BSP thread.
Depending on the depth and type of soil, they can either be pushed directly into the soil from ground level to the required depth or pushed into the base of a CPT test or drilled borehole.
SUBMERSIBLE TILT METER
In stock
IN-PLACE INCLINOMETER (IPI)
In stock
IPI-X IN PLACE INC – EXT
In stock
WATER LEVEL METER
In stock
Reviews
There are no reviews yet.