DIGITAL PIEZOMETER – dPiezo
YieldPoint’s d-Piezo digital piezometer integrates a MEMS transducer with a micro-controller to provide a robust digital solution for water pressure and depth monitoring.
Description
YieldPoint’s d-Piezo digital piezometer integrates a MEMS transducer with a micro-controller to provide a robust digital solution for water pressure and depth monitoring. The output signal is directly in kPa(0.01kPa resolution) and degC (0.1oC resolution). The digital output string is tramsmitted as an RS485 signal, with 9600 baud rate(9600,9,n,1), and is ASCII encoded. Each instrument has a unique ID. RS485 signals tolerate wet conditions and the signals can be transmitted up to 1000m without amplification.
Additional information
| Brands | |
|---|---|
| Range |
1000 kPa |
| Resolution |
0.01 kPa (approximately 1mm of water over 100m range) |
| Temperature |
-35 to +85°C |
| Output Signal |
RS485 with transmission to data logger up to 500m over 2 x tp. |
Reviews (0)
About brand
Yieldpoint is a leader in the design, manufacture and support of geotechnical monitoring solutions with the highest quality and reliability and at the best possible price for civil and mining.
Data Sheets
Related products
VW PIEZOMETER VWP-3000 SERIES
In stock
PRESSURE TRANSDUCER VWT-9000 SERIES
In stock
The Geosense® VWT-9000 Series of Pressure Transducers are designed to be connected directly into hydraulic or pneumatic pressure lines by means of a 1/4” BSPF thread. Other thread sizes are available on request.
They are typically used to monitor uplift pressures within dams and to enable manual standpipe piezometers to be upgraded into an automated data acquisition system.
NANO TRIAXIAL TILT SENSOR
In stock
The Nano range uses the same core platform as our other tilt sensors, so it can deliver a similar level of performance and reliability, all in a small and robust enclosure. Nanos have been successfully used in many applications, including:
- Tunnel distortion
- Tunnel heave/settlement
- Embankment slippage (used in conjunction with stake mounts)
- Structural movement
- Rail track heave/settlement
- Rail trackbed cant and twist
IN-PLACE INCLINOMETER (IPI)
In stock
TILT BEAM MEMS
In stock
MEMS Tilt Beams are designed for attachment to structures, on either a vertical or horizontal surface, for the measurement of tilt or differential settlement.
They consist of a highly accurate MEMS sensor housed in a fully sealed enclosure which is mounted on a lightweight rigid GRP beam. This can be mounted onto the structure using special anchors. The GRP beam has a very low coefficient of thermal expansion meaning that thermal affects are minimised.
WATER LEVEL METER
In stock
PENDULUM SYSTEM
In stock
HPS-3500 (Hanging) and IPS-3000 (Inverted) Pendulums are used to measure the tilt or rotation by measuring the relative internal horizontal displacement of points along a true vertical line. Each has a tensioned, stainless steel wire and the effects of the earth gravitational forces to guarantee a perfectly vertical line between a fixed point and a tensioning mechanism. Typical applications include concrete dams, bridges and high rise buildings.
INCLINOMETER CASING QJ
In stock
Reviews
There are no reviews yet.