WIRE EXTENSOMETER GEO-DW300
The GEO-DW300 Wire Extensometer is designed to monitor the changes in distance between two anchor points and is available complete with vibrating wire displacement transducer. A stainless steel wire connects the transducer to the opposing anchor.
Description
The mounting plate holds the transducer at one end and a pulley at the other end. A stainless steel wire connects the transducer to the opposing anchor. The pulley allows the transducer and anchor to be mounted on different planes, including perpendicular surfaces, up to 10m apart. The spring-loaded transducer keeps the steel wire tensioned.
Typical applications include monitoring cracks or displacements in civil structures.
Additional information
| Brands | |
|---|---|
| Range |
25mm, 50mm, 75mm, 100mm |
| Accuracy |
±0.1% FS |
| Resolution |
<0.025% FS |
Reviews (0)
About brand
Geosense Ltd is one of Europe’s leading manufacturers and suppliers of instruments to the geotechnical, civil engineering, mining and environmental industries.
Geosense products are used globally in major projects in more than 68 countries. With a comprehensive in-house design and manufacturing capability, we can provide products not only to tight deadlines but also to suit custom-engineered solutions for specific project requirements.
Geosense specialises in the manufacture of vibrating wire and MEMS sensors, which are used to produce a wide range of instruments. In addition we manufacture automated data acquisition systems to complement our sensors, including wireless systems.
Data Sheets
Related products
VW PIEZOMETER VWP-3000 SERIES
In stock
MULTI-POINT VW PIEZOMETER
In stock
SUBMERSIBLE TILT METER
In stock
PORTABLE MEMS INCLINOMETER
In stock
The MEMS Portable Inclinometer system utilises modern communication and Smart devices to enable the tilt data generated by the probe to be managed, stored and transferred directly from site via FTP, API, email or other communication platforms.
It is available for vertical, inclined and horizontal applications.
TILT BEAM MEMS
In stock
MEMS Tilt Beams are designed for attachment to structures, on either a vertical or horizontal surface, for the measurement of tilt or differential settlement.
They consist of a highly accurate MEMS sensor housed in a fully sealed enclosure which is mounted on a lightweight rigid GRP beam. This can be mounted onto the structure using special anchors. The GRP beam has a very low coefficient of thermal expansion meaning that thermal affects are minimised.
INCLINOMETER CASING XC
In stock
INCLINOMETER SPIRAL SENSOR
In stock
MAGNETIC EXTENSOMETER GXM RANGE
In stock
The GEO-XM settlement system is a magnet extensometer system used typically to monitor settlement and heave in foundations, excavations and embankments.
Data received identifies the depth and position where settlement has occurred as well as the total amount of settlement.
It can also be installed behind retaining structures, such as sheet piles and slurry walls, and above underground openings, such as tunnels and shafts.
Reviews
There are no reviews yet.