VW JOINT METER
The instrument consists of two parts, a socket and the main body with a waterproof vibrating wire sensing gauge.
During construction of the structure, the socket is secured to the form and embedded into a lift of the block to be constructed. After removal of the form, and prior to concreting of adjacent block, the gauge is screwed into the socket, set at the desired range and then embedded into concrete.
Opening and closing of joint is then measured by the gauge, which is firmly anchored in both blocks. The instrument body includes universal joints, on which sensing element is mounted, accommodating a small degree of shear movement that might occur.
The vibrating wire joint meter is a robust and accurate instrument with excellent long-term stability. It can be measured by vibrating wire portable readout units or a data logger if remote continuous monitoring of the joints is required. All measurements are compared to an initial datum reading, providing a history of magnitude and rate of movement at the joint.
| Brands | Geosense |
|---|---|
| Ranges | 15, 25, 50 mm (other ranges available) |
| Over range | 1.25 x range |
| Resolution | 0.025% FS |
| Accuracy | 0.2% F.S. (0.1% FS optional) |
| Operating temp. | -20 to +80°C |
| Length x diameter | 340mm or 430mm x 51mm |
Related products
VW PIEZOMETER VWP-3000 SERIES
In stock
VWPHT-3600 SERIES
In stock
The VWPHT-3600 series High Temperature Piezometers are suitable for the extreme environments of temperature and pressure found within applications such as geothermal heat and enhanced oil recovery systems including steam assisted gravity drainage (SAGD) and cyclic steam stimulation (CSS). They are capable of monitoring high temperatures up to 250°C and pressures up to 34.5 MPa.
PRESSURE TRANSDUCER VWT-9000 SERIES
In stock
The Geosense® VWT-9000 Series of Pressure Transducers are designed to be connected directly into hydraulic or pneumatic pressure lines by means of a 1/4” BSPF thread. Other thread sizes are available on request.
They are typically used to monitor uplift pressures within dams and to enable manual standpipe piezometers to be upgraded into an automated data acquisition system.
PORTABLE MEMS INCLINOMETER
In stock
The MEMS Portable Inclinometer system utilises modern communication and Smart devices to enable the tilt data generated by the probe to be managed, stored and transferred directly from site via FTP, API, email or other communication platforms.
It is available for vertical, inclined and horizontal applications.
WATER LEVEL METER
In stock
INCLINOMETER CASING QJ
In stock
INCLINOMETER CASING XC
In stock
INCLINOMETER SPIRAL SENSOR
In stock
Reviews
There are no reviews yet.