![u[sonic]WS7 Weather sensor](https://terrasense.ae/wp-content/uploads/2023/11/usonicWS7-300x300.png)
VW LIQUID SETTLEMENT SYSTEM
The VWLSS-200 Vibrating Wire Liquid Settlement System is used to monitor settlement or heave in soils and other structures such as embankments, earth and rockfill dams.
The main components are a reservoir (single or multiple), liquid-filled tubing and a vibrating wire pressure transducer cell mounted on a plate or, for borehole application, attached to an anchor.
Description
The vibrating wire sensor is attached to a settlement plate at the point of estimated settlement. The sensor is connected via two liquid-filled tubes which are connected to a reservoir located on stable ground.
As the transducer settles with the surrounding ground the height of the column is increased and the corresponding higher pressure is measured by the transducer.
Settlements are calculated by converting the pressure to millimetres of liquid head.
Additional information
| Brands | |
|---|---|
| Standard Range |
7, 17m |
| Sensor accuracy |
0.1% FS |
| System accuracy |
Site dependent |
| Resolution |
0.025% FS |
| Temperature range |
-20°C to +80°C |
Reviews (0)
About brand
Geosense Ltd is one of Europe’s leading manufacturers and suppliers of instruments to the geotechnical, civil engineering, mining and environmental industries.
Geosense products are used globally in major projects in more than 68 countries. With a comprehensive in-house design and manufacturing capability, we can provide products not only to tight deadlines but also to suit custom-engineered solutions for specific project requirements.
Geosense specialises in the manufacture of vibrating wire and MEMS sensors, which are used to produce a wide range of instruments. In addition we manufacture automated data acquisition systems to complement our sensors, including wireless systems.
Data Sheets
Related products
VWPHT-3600 SERIES
In stock
The VWPHT-3600 series High Temperature Piezometers are suitable for the extreme environments of temperature and pressure found within applications such as geothermal heat and enhanced oil recovery systems including steam assisted gravity drainage (SAGD) and cyclic steam stimulation (CSS). They are capable of monitoring high temperatures up to 250°C and pressures up to 34.5 MPa.
IN-PLACE TILT METER MEMS
In stock
PORTABLE MEMS INCLINOMETER
In stock
The MEMS Portable Inclinometer system utilises modern communication and Smart devices to enable the tilt data generated by the probe to be managed, stored and transferred directly from site via FTP, API, email or other communication platforms.
It is available for vertical, inclined and horizontal applications.
TILT BEAM
In stock
The Tilt Beam is a lightweight, rigid aluminium beam that is used in conjunction with a Triaxial Tilt Node, a NanoPlus or a NanoMacro.
The tilt beam has been successfully used in many applications, including:
- Movement monitoring of any structure
- Longitudinal settlement
- Tunnel convergence/divergence
- Lateral displacements
IPI-X IN PLACE INC – EXT
In stock
INCLINOMETER CASING QJ
In stock
INCLINOMETER CASING XC
In stock
INCLINOMETER SPIRAL SENSOR
In stock
Reviews
There are no reviews yet.