Analogue Nodes
Ackcio Analogue Nodes monitor all types of sensors that have analogue outputs (voltage, current-loop, Wheatstone Bridge).
BEAM-AN-S1: Supports 1 sensor (2 analogue channels and 1 thermistor channel)
BEAM-AN-S4: Supports 4 sensors (8 analogue channels and 4 thermistor channels)
Features:
- Compatible with most types of analogue sensors.
- Provides noise-free, accurate, repeatable, and reliable sensor readings.
- In-built memory that stores over 65,000 readings with time.
- Uses Ackcio Mesh, a long-range mesh network, to send sensor data to the Gateway.
- IP67-rated cast-aluminium enclosure that is ideal for deployments in harsh environments.
- Low-power, long battery life.
- Internal barometer to obtain environmental pressure readings for sensor reading compensation
| Brands | ACKCIO |
|---|---|
| Models | BEAM-AN-S1 BEAM-AN-S4 |
| ADC | 24-bit (22 true bit) low noise differential analogue-to-digital converters Auto-calibration and auto-range Sinc-3 filter for 50-60Hz supply rejection |
| Measurement Rate | 50 SPS data acquisition with variable size moving average filter |
| Instrument WARMUP | User-configurable Min: 1s Max: 2min |
| Specification for Voltage-Output Sensors | Measurement Range: ±10V Resolution: 0.0001V Accuracy: ±0.05% FS |
| Specification for Current Loop-Output Sensors | Measurement Range: 0-20mA Resolution: 0.005mA Accuracy: ±0.05% FS |
| Specification for Wheatstone Bridge and Potentiometer Sensors | Minimum Resistance: 120 Ohm Resolution: 1µV/V Accuracy: 0.1% FS |
| Specification for Thermistor | Measurement Range: -20°C to +80°C for 3K thermistor Resolution: 0.1°C Accuracy: ±0.2°C |
| Absolute Input Limits | ±12V |
We help the world’s most critical industries enhance safety, manage risks, and increase productivity by automating their industrial sensor monitoring processes. We envision a future where wireless monitoring takes Centre stage across all industrial operations to keep their people and assets safe.
Related products
VW PIEZOMETER VWP-3000 SERIES
In stock
MULTI-POINT VW PIEZOMETER
In stock
DRIVE-IN PIEZOMETERS WP-3400 & SGP-3500 SERIES
In stock
Drive-in piezometers, also referred to as push-in piezometers, are designed for installing in soft clays, organic or fine grained cohesionless soils typically with a SPT-N value less than 10. They are available with a CPT fitting or 1” BSP thread.
Depending on the depth and type of soil, they can either be pushed directly into the soil from ground level to the required depth or pushed into the base of a CPT test or drilled borehole.
PRESSURE TRANSDUCER VWT-9000 SERIES
In stock
The Geosense® VWT-9000 Series of Pressure Transducers are designed to be connected directly into hydraulic or pneumatic pressure lines by means of a 1/4” BSPF thread. Other thread sizes are available on request.
They are typically used to monitor uplift pressures within dams and to enable manual standpipe piezometers to be upgraded into an automated data acquisition system.
SUBMERSIBLE TILT METER
In stock
IN-PLACE INCLINOMETER (IPI)
In stock
TILT BEAM MEMS
In stock
MEMS Tilt Beams are designed for attachment to structures, on either a vertical or horizontal surface, for the measurement of tilt or differential settlement.
They consist of a highly accurate MEMS sensor housed in a fully sealed enclosure which is mounted on a lightweight rigid GRP beam. This can be mounted onto the structure using special anchors. The GRP beam has a very low coefficient of thermal expansion meaning that thermal affects are minimised.
IMAGING & CAMERA
In stock
The FlatMesh 4G Camera is a best in class solar powered solution for static imagery in remote or industrial areas.
It contains a monochrome digital camera which can take clear, high quality photographs day or night without the use of external illuminators.
The 4G camera connects to a Senceive EdgeHub (with FlatMesh) unit which provides power and connectivity over the cellular network (2G/3G/4G) or existing wired ethernet networks.

Reviews
There are no reviews yet.