ROD SETTLEMENT SYSTEM GEO-XR
The GEO-XR single point rod settlement system is used to monitor sub-surface settlement or heave of ground.
The system comprises a series of inner steel rods and plastic outer sleeves together with plates when positioned on ground before fill or Borros type anchors when used in boreholes.
Description
The inner steel rod is made from heavy duty 1metre lengths of 25mm outside diameter with a 3/4” BSPM thread with external socket.
The outer plastic sleeves in 1metre lengths can be 60mm (2”) or 165 mm (6”) diameter with flush threads so that the inner and outer rod can be extended together.
A circular or square thick steel plate with a 3/4” BSPF socket welded onto it allows the datum plate to be placed and the first inner rod connected. Outer sleeves are placed over the steel rods as filling occurs.
Additional information
| Brands | |
|---|---|
| Steel rod OD |
25, 33mm |
| Steel rod ID |
19, 25mm |
| Steel rod length |
1 m |
| PVC sleeve OD |
60, 165mm |
| PVC sleeve ID |
52, 150mm |
| PVC sleeve connection |
Flush thread |
| PVC sleeve length |
1 m |
Reviews (0)
About brand
Geosense Ltd is one of Europe’s leading manufacturers and suppliers of instruments to the geotechnical, civil engineering, mining and environmental industries.
Geosense products are used globally in major projects in more than 68 countries. With a comprehensive in-house design and manufacturing capability, we can provide products not only to tight deadlines but also to suit custom-engineered solutions for specific project requirements.
Geosense specialises in the manufacture of vibrating wire and MEMS sensors, which are used to produce a wide range of instruments. In addition we manufacture automated data acquisition systems to complement our sensors, including wireless systems.
Data Sheets
Related products
VWPHT-3600 SERIES
In stock
The VWPHT-3600 series High Temperature Piezometers are suitable for the extreme environments of temperature and pressure found within applications such as geothermal heat and enhanced oil recovery systems including steam assisted gravity drainage (SAGD) and cyclic steam stimulation (CSS). They are capable of monitoring high temperatures up to 250°C and pressures up to 34.5 MPa.
TRIAXIAL TILT SENSOR NODE
In stock
IN-PLACE TILT METER MEMS
In stock
SUBMERSIBLE TILT METER
In stock
TILT BEAM
In stock
The Tilt Beam is a lightweight, rigid aluminium beam that is used in conjunction with a Triaxial Tilt Node, a NanoPlus or a NanoMacro.
The tilt beam has been successfully used in many applications, including:
- Movement monitoring of any structure
- Longitudinal settlement
- Tunnel convergence/divergence
- Lateral displacements
TILT BEAM MEMS
In stock
MEMS Tilt Beams are designed for attachment to structures, on either a vertical or horizontal surface, for the measurement of tilt or differential settlement.
They consist of a highly accurate MEMS sensor housed in a fully sealed enclosure which is mounted on a lightweight rigid GRP beam. This can be mounted onto the structure using special anchors. The GRP beam has a very low coefficient of thermal expansion meaning that thermal affects are minimised.
WATER LEVEL METER
In stock
HUMIDITY & CORROSION (CorroDec®2G)
In stock
The structural infrastructure must always meet requirements such as performance, stability and durability. These requirements will have a lasting effect on our mobility in the future. The corrosion risk and the corrosion activity of the reinforcing steel largely define these requirements and are determined by various impact and material parameters.
Reviews
There are no reviews yet.