DIGITAL PIEZOMETER – dPiezo
YieldPoint’s d-Piezo digital piezometer integrates a MEMS transducer with a micro-controller to provide a robust digital solution for water pressure and depth monitoring.
Description
YieldPoint’s d-Piezo digital piezometer integrates a MEMS transducer with a micro-controller to provide a robust digital solution for water pressure and depth monitoring. The output signal is directly in kPa(0.01kPa resolution) and degC (0.1oC resolution). The digital output string is tramsmitted as an RS485 signal, with 9600 baud rate(9600,9,n,1), and is ASCII encoded. Each instrument has a unique ID. RS485 signals tolerate wet conditions and the signals can be transmitted up to 1000m without amplification.
Additional information
| Brands | |
|---|---|
| Range |
1000 kPa |
| Resolution |
0.01 kPa (approximately 1mm of water over 100m range) |
| Temperature |
-35 to +85°C |
| Output Signal |
RS485 with transmission to data logger up to 500m over 2 x tp. |
Reviews (0)
About brand
Yieldpoint is a leader in the design, manufacture and support of geotechnical monitoring solutions with the highest quality and reliability and at the best possible price for civil and mining.
Data Sheets
Related products
MULTI-POINT VW PIEZOMETER
In stock
DRIVE-IN PIEZOMETERS WP-3400 & SGP-3500 SERIES
In stock
Drive-in piezometers, also referred to as push-in piezometers, are designed for installing in soft clays, organic or fine grained cohesionless soils typically with a SPT-N value less than 10. They are available with a CPT fitting or 1” BSP thread.
Depending on the depth and type of soil, they can either be pushed directly into the soil from ground level to the required depth or pushed into the base of a CPT test or drilled borehole.
NANO TRIAXIAL TILT SENSOR
In stock
The Nano range uses the same core platform as our other tilt sensors, so it can deliver a similar level of performance and reliability, all in a small and robust enclosure. Nanos have been successfully used in many applications, including:
- Tunnel distortion
- Tunnel heave/settlement
- Embankment slippage (used in conjunction with stake mounts)
- Structural movement
- Rail track heave/settlement
- Rail trackbed cant and twist
STANDPIPE PIEZOMETER
In stock
INCLINOMETER CASING XC
In stock
INCLINOMETER SPIRAL SENSOR
In stock
MAGNETIC EXTENSOMETER GXM RANGE
In stock
The GEO-XM settlement system is a magnet extensometer system used typically to monitor settlement and heave in foundations, excavations and embankments.
Data received identifies the depth and position where settlement has occurred as well as the total amount of settlement.
It can also be installed behind retaining structures, such as sheet piles and slurry walls, and above underground openings, such as tunnels and shafts.
REED SWITCH PROBE
In stock
Reviews
There are no reviews yet.